A troubleshooting ____ is a record of a specific problem that occurs in a particular
piece of equipment.
Give this one a try later!
report
Pullers are sized by pressure, wear, and ____.
Give this one a try later!
spread
A(n) ____ cylinder is a cylinder that slows piston movement to provide a gradual stop.
,Give this one a try later!
cushion
A(n) ____ bearing is a bearing that contains moving elements, which provide a low-
friction support surface for rotating on sliding surfaces.
Give this one a try later!
anti-friction
____ is a joining process that joins parts by heating the filler metal to temperatures
greater than 840F, but less than the melting point of the base metal.
Give this one a try later!
brazing
A(n) ____ is a container for storing fluid under little or no pressure.
Give this one a try later!
reservoir
A(n) ____ circuit is a circuit having an incomplete path, which prevents current flow.
, Give this one a try later!
open
____ is the discharge of an electric current across a gap.
Give this one a try later!
arcing
A(n) ____ is an electrical switch that is actuated by a separate circuit.
Give this one a try later!
relay
____ is allowing a pump to run against little or no pressure.
Give this one a try later!
unloading
A(n) ____ is a heat exchanger through which heat is transferred to the low-pressure
refrigerant liquid.
Give this one a try later!
piece of equipment.
Give this one a try later!
report
Pullers are sized by pressure, wear, and ____.
Give this one a try later!
spread
A(n) ____ cylinder is a cylinder that slows piston movement to provide a gradual stop.
,Give this one a try later!
cushion
A(n) ____ bearing is a bearing that contains moving elements, which provide a low-
friction support surface for rotating on sliding surfaces.
Give this one a try later!
anti-friction
____ is a joining process that joins parts by heating the filler metal to temperatures
greater than 840F, but less than the melting point of the base metal.
Give this one a try later!
brazing
A(n) ____ is a container for storing fluid under little or no pressure.
Give this one a try later!
reservoir
A(n) ____ circuit is a circuit having an incomplete path, which prevents current flow.
, Give this one a try later!
open
____ is the discharge of an electric current across a gap.
Give this one a try later!
arcing
A(n) ____ is an electrical switch that is actuated by a separate circuit.
Give this one a try later!
relay
____ is allowing a pump to run against little or no pressure.
Give this one a try later!
unloading
A(n) ____ is a heat exchanger through which heat is transferred to the low-pressure
refrigerant liquid.
Give this one a try later!
