CCIL EXAM REVIEW SOLVED QUESTIONS COMPLETE ANSWERS GRADED A PLUS
CCIL Practice TEST Final Study Guide 2026/2027
Questions and Answers Verified Solutions Latest
Update
Question:
ACI
Answer:
American Concrete Institute
Question:
A23.2-3C 3. Summary
Answer:
This Test Method is used to cast compressive or flexural strength test specimens and cure them on
site prior to timely transportation to the laboratory for subsequent curing and strength testing.
Question:
A23.2-3C 4. Significance and use
Answer:
This Test Method specifies the standard procedure for making, curing, protecting, and transporting
concrete specimens.
Question:
4. Significance and use If the specimens are made and standard cured as specified in this Test
Method, the resulting strength data, when the specimens are tested in accordance with the relevant
test method, may be used for the following purposes:
Answer:
1. acceptance testing for specified strength; 2. checking adequacy of mixture proportions for
strength; and 3. quality control
, Question:
4. Significance and use If the specimens are made and field-cured as specified in this Test Method,
the resulting strength data, when the specimens are tested in accordance with the relevant Test
Method, may be used for the following purposes:
Answer:
1. consideration of whether the structure is able to be put into service; 2. comparison with test results
of standard cured specimens or with test results from various in place test methods; 3. adequacy of
curing and protection of concrete in the concrete structure; and 4. formwork or shoring removal time
requirements.
Question:
5. Apparatus 5.1 Moulds for compression test specimens:
Answer:
Use cylindrical moulds, meeting the requirements of CSA A23.2-1D, having nonabsorbent surfaces
and sufficiently rigid to hold their shape during the moulding of the test specimens. Do not use
cardboard moulds for specified concrete strengths greater than 35 MPa. Lightly coat reusable
moulds with mineral oil or other suitable non- reactive form release material before use.
Question:
5.3 Tamping rod For 100 mm x 200 mm cylinders,
Answer:
se a round straight steel tamping rod 10 +/- 1 mm in diameter and between 450 mm and 600 mm in
length, having at least one end rounded to a hemispherical tip.
Question:
5.3 Tamping rod For cylinders 150 mm in diameter or greater and for rectangular moulds,
Answer:
use a round straight steel tamping rod 16 +/- 1 mm in diameter and not less than 450 mm nor more
than 600 mm in length, having at least one end rounded to a hemispherical tip.
CCIL Practice TEST Final Study Guide 2026/2027
Questions and Answers Verified Solutions Latest
Update
Question:
ACI
Answer:
American Concrete Institute
Question:
A23.2-3C 3. Summary
Answer:
This Test Method is used to cast compressive or flexural strength test specimens and cure them on
site prior to timely transportation to the laboratory for subsequent curing and strength testing.
Question:
A23.2-3C 4. Significance and use
Answer:
This Test Method specifies the standard procedure for making, curing, protecting, and transporting
concrete specimens.
Question:
4. Significance and use If the specimens are made and standard cured as specified in this Test
Method, the resulting strength data, when the specimens are tested in accordance with the relevant
test method, may be used for the following purposes:
Answer:
1. acceptance testing for specified strength; 2. checking adequacy of mixture proportions for
strength; and 3. quality control
, Question:
4. Significance and use If the specimens are made and field-cured as specified in this Test Method,
the resulting strength data, when the specimens are tested in accordance with the relevant Test
Method, may be used for the following purposes:
Answer:
1. consideration of whether the structure is able to be put into service; 2. comparison with test results
of standard cured specimens or with test results from various in place test methods; 3. adequacy of
curing and protection of concrete in the concrete structure; and 4. formwork or shoring removal time
requirements.
Question:
5. Apparatus 5.1 Moulds for compression test specimens:
Answer:
Use cylindrical moulds, meeting the requirements of CSA A23.2-1D, having nonabsorbent surfaces
and sufficiently rigid to hold their shape during the moulding of the test specimens. Do not use
cardboard moulds for specified concrete strengths greater than 35 MPa. Lightly coat reusable
moulds with mineral oil or other suitable non- reactive form release material before use.
Question:
5.3 Tamping rod For 100 mm x 200 mm cylinders,
Answer:
se a round straight steel tamping rod 10 +/- 1 mm in diameter and between 450 mm and 600 mm in
length, having at least one end rounded to a hemispherical tip.
Question:
5.3 Tamping rod For cylinders 150 mm in diameter or greater and for rectangular moulds,
Answer:
use a round straight steel tamping rod 16 +/- 1 mm in diameter and not less than 450 mm nor more
than 600 mm in length, having at least one end rounded to a hemispherical tip.
