Certified Playground Safety Inspector CPSI
Exam Questions and Answers Verified
Solutions Latest Update 2026/2027
Question:
2. The fish or wedge probe is used to determine whether or not a
hazard exists on.
Answer:
a partially bounded opening
Question:
3. Which of the following is correct regarding the impact-attenuation
of surfacing material.
Answer:
Critical height must equal or exceed fall height
Question:
4. When evaluating the structural integrity of a support structure for a
swing that appears to be failing, a CPSI should.
Answer:
hire a licensed professional engineer to certify the integrity of the equipment
Question:
5. Manufacturers of playground equipment must: provide the
manufacturer's identification of the equipment.
Question:
6. The majority of injuries associated with playground equipment
result from.
,Answer:
falls to the surface on which the equipment was located
Question:
7. An opening may present a common crush or shear hazard only if it.
Answer:
grabs the 5/8" (16mm) dowel
Question:
8. The criteria for unitary surface materials includes meeting
requirements of.
Answer:
ASTM F1292 and F1487
Question:
9. Regarding playground safety signage, which of the following is
correct.
Answer:
Signage may not prevent accidents but may reduce liability
Question:
10. Which of the following factors is MOST important when
determining the frequency of inspections of surfacing.
Answer:
Type of surfacing and amount of use
Question:
11. When planning a playground for public use, the play equipment
that is chosen must.
, Answer:
be appropriate for the age of intended users
Question:
12. A spring rocker with seat height of 26" is about to be installed
adjacent to the side of a fully enclosed bucket swing set. The minimum distance required between
the swing set and the rocker is.
Answer:
108" or 9'
Question:
13. The Site History File for a playground should contains.
Answer:
a comprehensive inventory of all equipment, a parts list, maintenance, and inspection
recommendations
Question:
14. What is the minimum use zone between a stand-alone climber and
a standing-rocking/springing playground piece.
Answer:
156" or 13'
Question:
15. The _____ of each play structure shall provide clear and concise
inspection instructions.
Answer:
Manufacturer
Question:
Exam Questions and Answers Verified
Solutions Latest Update 2026/2027
Question:
2. The fish or wedge probe is used to determine whether or not a
hazard exists on.
Answer:
a partially bounded opening
Question:
3. Which of the following is correct regarding the impact-attenuation
of surfacing material.
Answer:
Critical height must equal or exceed fall height
Question:
4. When evaluating the structural integrity of a support structure for a
swing that appears to be failing, a CPSI should.
Answer:
hire a licensed professional engineer to certify the integrity of the equipment
Question:
5. Manufacturers of playground equipment must: provide the
manufacturer's identification of the equipment.
Question:
6. The majority of injuries associated with playground equipment
result from.
,Answer:
falls to the surface on which the equipment was located
Question:
7. An opening may present a common crush or shear hazard only if it.
Answer:
grabs the 5/8" (16mm) dowel
Question:
8. The criteria for unitary surface materials includes meeting
requirements of.
Answer:
ASTM F1292 and F1487
Question:
9. Regarding playground safety signage, which of the following is
correct.
Answer:
Signage may not prevent accidents but may reduce liability
Question:
10. Which of the following factors is MOST important when
determining the frequency of inspections of surfacing.
Answer:
Type of surfacing and amount of use
Question:
11. When planning a playground for public use, the play equipment
that is chosen must.
, Answer:
be appropriate for the age of intended users
Question:
12. A spring rocker with seat height of 26" is about to be installed
adjacent to the side of a fully enclosed bucket swing set. The minimum distance required between
the swing set and the rocker is.
Answer:
108" or 9'
Question:
13. The Site History File for a playground should contains.
Answer:
a comprehensive inventory of all equipment, a parts list, maintenance, and inspection
recommendations
Question:
14. What is the minimum use zone between a stand-alone climber and
a standing-rocking/springing playground piece.
Answer:
156" or 13'
Question:
15. The _____ of each play structure shall provide clear and concise
inspection instructions.
Answer:
Manufacturer
Question:
