RVTI || Get it Correct.
where is the regulator in relation to the container? correct answers Downstream
what does the first stage of the regulator reduce the pressure to? correct answers approximately
10
lb/in2 gauge (PSIG)
what does the second stage of the regulator reduce the pressure too? correct answers 11 in WC
each magnet on a trailer brae system should draw how many amps? correct answers 3.2 amps
max
what kind of lube should be used for slideouts? correct answers dry lube
a class II hitch is rated for? correct answers Class II hitches are weight carrying (WC) hitches
rated up to 3500 lbs. gross trailer weight (GTW) with a maximum trailer tongue weight (TW) of
300 lbs.
when performing a lockup test where should you put the manometer? correct answers barbed
fitting on the test device
what position should the sweep seal be in? correct answers na Inspect for proper contact with
slide-out wall, roof, and floor; verify good contact with each sealing surface; no rotting or cracks
and tears in rubber components
to operate the leveling system what position should the brakes be in? correct answers parking
brake
should you use vise grips on propane tanks correct answers no
, where is the automatic change over regulator found? correct answers inbetween two propane
containers
on a new trailer the drums are seated after how many braking applications? correct answers after
the first 200 miles of operation
What is the purpose of a propane regulator? correct answers to reduce the pressure of the
propane
What does it mean when you have a grid pattern on a laminated sidewall? correct answers Means
it's a hung wall
Fiberglass is glued to the stud work
where should a motorhomes exhaust pipes be in relation to the back of the motorhome? correct
answers Sticking out slightly past the back of the home
Why should you purge a new propane container correct answers New propane containers could
have air and water contaminants creating false pressure
DT3.5 mean what? correct answers Dip tube length 3.5
what is a contaminant of hydrofluid? is it air? correct answers water
who regulates the propane safety NFPA? or AGA? correct answers DOT for the cylinders
Asme tanks
what is the fuction of a stabilizer jack correct answers just keep the rv from rocking
where is the regulator in relation to the container? correct answers Downstream
what does the first stage of the regulator reduce the pressure to? correct answers approximately
10
lb/in2 gauge (PSIG)
what does the second stage of the regulator reduce the pressure too? correct answers 11 in WC
each magnet on a trailer brae system should draw how many amps? correct answers 3.2 amps
max
what kind of lube should be used for slideouts? correct answers dry lube
a class II hitch is rated for? correct answers Class II hitches are weight carrying (WC) hitches
rated up to 3500 lbs. gross trailer weight (GTW) with a maximum trailer tongue weight (TW) of
300 lbs.
when performing a lockup test where should you put the manometer? correct answers barbed
fitting on the test device
what position should the sweep seal be in? correct answers na Inspect for proper contact with
slide-out wall, roof, and floor; verify good contact with each sealing surface; no rotting or cracks
and tears in rubber components
to operate the leveling system what position should the brakes be in? correct answers parking
brake
should you use vise grips on propane tanks correct answers no
, where is the automatic change over regulator found? correct answers inbetween two propane
containers
on a new trailer the drums are seated after how many braking applications? correct answers after
the first 200 miles of operation
What is the purpose of a propane regulator? correct answers to reduce the pressure of the
propane
What does it mean when you have a grid pattern on a laminated sidewall? correct answers Means
it's a hung wall
Fiberglass is glued to the stud work
where should a motorhomes exhaust pipes be in relation to the back of the motorhome? correct
answers Sticking out slightly past the back of the home
Why should you purge a new propane container correct answers New propane containers could
have air and water contaminants creating false pressure
DT3.5 mean what? correct answers Dip tube length 3.5
what is a contaminant of hydrofluid? is it air? correct answers water
who regulates the propane safety NFPA? or AGA? correct answers DOT for the cylinders
Asme tanks
what is the fuction of a stabilizer jack correct answers just keep the rv from rocking
