CAD-100 Final Exam (Latest Exam) || Most Recent Exam
2026|2027 Actual Complete Real Exam Questions And Correct
Answers (Verified Answers) Already Graded A+ | Newest Exam |
Just Released!!
___ are used to aid in locating details or parts or revision
notes outside the
border - ANSWER-
TBD
The title block is typically located in the ___ corner of the print
- ANSWER-
lower right
hand
The ___ is the ratio between the size of the part as drawn and
the actual size of the part Sheet Size
Drawing Title
Scale
Sheet Number - ANSWER-Scale
What does the acronym CAGE stand for? - ANSWER-
Commercial and
Government
Entity
The ___ block lists the assembly or subassembly in
which the part or
,assembly is used - ANSWER-
Application Block
In manufacturing, part dimensions are often within a range,
so most title
blocks include a ___ to provide general limits - ANSWER-
Tolerance block
Many companies use ___ neatly arranged on a drawing to
identify the parts -
ANSWER-
baloons!
A block that is important to read in the early stage of examining
a print is the
___ lock, which helps determine if the print being observed
is up to date -
ANSWER-Revision
History
Which of the following is not typically included in a basic parts
list?
Find Number
Quantity Reqd
Nomenclature
Finish - ANSWER-Finish
,Standards for sheet sizes, title blocks, and associated lists are
all covered in
one ASME standard. - ANSWER-
False, TBD
Architectural drawing sheet sizes are larger than engineering
drawing sheet
sizes. - ANSWER-
True!!!
Metric sheet sizes commonly used for industrial prints are
identified as A0,
B1, C2, D3, and E4. - ANSWER-
False, TBD
Border lines are technically not in the alphabet of lines -
ANSWER-True!!
ASME recommends zoning for sheet sizes larger than B-Size
- ANSWER-
True!!!
All companies use the same standard title block format -
ANSWER-False,?
The size areaof the title block is used to indicate the overall
size of the part -
ANSWER-False!
paper size
, The scale of a drawing is expressed as "Real=Paper" -
ANSWER-False,
Paper=Real
The nomenclatrue or description column in a parts list is not
mandatory -
ANSWER-False,
mandatory
Another name for a parts list is "bill of materials" - ANSWER-
True!!!
Which of the following is NOT a type of angle line segments
can form? -
ANSWER-
Scalene
A line segment within a circle connecting two points other
than through the
center point is referred to as a _________ -
ANSWER-Chord
If a hexagon is inscribed within a circle, the measurement
_______ is
equivalent to the diameter of the circle -
ANSWER-i dunno
2026|2027 Actual Complete Real Exam Questions And Correct
Answers (Verified Answers) Already Graded A+ | Newest Exam |
Just Released!!
___ are used to aid in locating details or parts or revision
notes outside the
border - ANSWER-
TBD
The title block is typically located in the ___ corner of the print
- ANSWER-
lower right
hand
The ___ is the ratio between the size of the part as drawn and
the actual size of the part Sheet Size
Drawing Title
Scale
Sheet Number - ANSWER-Scale
What does the acronym CAGE stand for? - ANSWER-
Commercial and
Government
Entity
The ___ block lists the assembly or subassembly in
which the part or
,assembly is used - ANSWER-
Application Block
In manufacturing, part dimensions are often within a range,
so most title
blocks include a ___ to provide general limits - ANSWER-
Tolerance block
Many companies use ___ neatly arranged on a drawing to
identify the parts -
ANSWER-
baloons!
A block that is important to read in the early stage of examining
a print is the
___ lock, which helps determine if the print being observed
is up to date -
ANSWER-Revision
History
Which of the following is not typically included in a basic parts
list?
Find Number
Quantity Reqd
Nomenclature
Finish - ANSWER-Finish
,Standards for sheet sizes, title blocks, and associated lists are
all covered in
one ASME standard. - ANSWER-
False, TBD
Architectural drawing sheet sizes are larger than engineering
drawing sheet
sizes. - ANSWER-
True!!!
Metric sheet sizes commonly used for industrial prints are
identified as A0,
B1, C2, D3, and E4. - ANSWER-
False, TBD
Border lines are technically not in the alphabet of lines -
ANSWER-True!!
ASME recommends zoning for sheet sizes larger than B-Size
- ANSWER-
True!!!
All companies use the same standard title block format -
ANSWER-False,?
The size areaof the title block is used to indicate the overall
size of the part -
ANSWER-False!
paper size
, The scale of a drawing is expressed as "Real=Paper" -
ANSWER-False,
Paper=Real
The nomenclatrue or description column in a parts list is not
mandatory -
ANSWER-False,
mandatory
Another name for a parts list is "bill of materials" - ANSWER-
True!!!
Which of the following is NOT a type of angle line segments
can form? -
ANSWER-
Scalene
A line segment within a circle connecting two points other
than through the
center point is referred to as a _________ -
ANSWER-Chord
If a hexagon is inscribed within a circle, the measurement
_______ is
equivalent to the diameter of the circle -
ANSWER-i dunno
