Airborne School Qualification Test Exam
Practice Questions And Correct Answers
(Verified Answers) Plus Rationale 2026
Q&A| Instant Download Pdf
1. Which device is primarily used to automatically deploy the main
parachute during military static line jumps?
A. Ripcord
B. Static line
C. Reserve handle
D. Drogue chute
The static line is a cord attached to the aircraft that automatically
deploys the parachute as the jumper exits, ensuring immediate
canopy deployment at low altitude.
2. What is the correct sequence of the parachute landing fall (PLF)?
A. Side, back, front, feet
B. Back, side, front, feet
C. Feet, side, calf, thigh, buttocks, back
D. Front, feet, side, back
The PLF is designed to distribute landing impact across multiple body
parts in a specific sequence to reduce injury risk.
3. What is the primary purpose of the reserve parachute?
A. Improve maneuverability
B. Increase descent speed
C. Provide emergency backup in case of main canopy failure
, D. Assist in wind drift control
The reserve parachute serves as an emergency system deployed
when the main canopy malfunctions or fails to open properly.
4. Which aircraft is commonly used for airborne training jumps?
A. UH-60 Black Hawk
B. AH-64 Apache
C. C-130 Hercules
D. F-16 Fighting Falcon
The C-130 Hercules is widely used for airborne operations due to its
cargo capacity and ability to conduct controlled jump operations.
5. What is the main function of the reserve static line?
A. Controls descent rate
B. Releases cargo bundles
C. Ensures automatic deployment of reserve parachute if needed
D. Stabilizes jumper during exit
The reserve static line is designed to automatically deploy the reserve
parachute in emergency situations.
6. What is the correct body position when exiting the aircraft?
A. Feet first, arms crossed
B. Chin tucked, elbows tight, feet and knees together
C. Head back, legs spread
D. Arms extended, legs bent backward
A proper exit position ensures stability and reduces the risk of
entanglement with equipment or other jumpers.
7. What is the minimum safe altitude for main parachute deployment in
static line jumps?
A. 500 feet
B. 800 feet
C. Approximately 1,250 feet AGL
, D. 3,000 feet AGL
Static line jumps are designed to deploy at around 1,250 feet above
ground level to ensure sufficient canopy time.
8. What does a “partial malfunction” refer to in parachuting?
A. Complete failure to exit aircraft
B. Reserve parachute deployment
C. Canopy deployed but not fully inflated or functioning correctly
D. Successful landing without injury
A partial malfunction occurs when the parachute opens but does not
function as intended, requiring corrective action.
9. What is the purpose of slipstream during exit?
A. Stabilize canopy
B. Assist parachute deployment and separation from aircraft
C. Reduce wind resistance on landing
D. Increase jump altitude
Slipstream airflow helps carry the jumper away from the aircraft and
initiates parachute deployment in static line jumps.
10. Which condition is most hazardous during airborne operations?
A. Clear skies
B. Light wind
C. High wind drift conditions
D. Calm atmospheric pressure
High wind drift can carry jumpers far off the drop zone, increasing
injury and navigation risks.
11. What is the function of the reserve handle?
A. Controls descent rate
B. Releases static line
C. Manually deploys the reserve parachute
D. Opens main canopy faster
Practice Questions And Correct Answers
(Verified Answers) Plus Rationale 2026
Q&A| Instant Download Pdf
1. Which device is primarily used to automatically deploy the main
parachute during military static line jumps?
A. Ripcord
B. Static line
C. Reserve handle
D. Drogue chute
The static line is a cord attached to the aircraft that automatically
deploys the parachute as the jumper exits, ensuring immediate
canopy deployment at low altitude.
2. What is the correct sequence of the parachute landing fall (PLF)?
A. Side, back, front, feet
B. Back, side, front, feet
C. Feet, side, calf, thigh, buttocks, back
D. Front, feet, side, back
The PLF is designed to distribute landing impact across multiple body
parts in a specific sequence to reduce injury risk.
3. What is the primary purpose of the reserve parachute?
A. Improve maneuverability
B. Increase descent speed
C. Provide emergency backup in case of main canopy failure
, D. Assist in wind drift control
The reserve parachute serves as an emergency system deployed
when the main canopy malfunctions or fails to open properly.
4. Which aircraft is commonly used for airborne training jumps?
A. UH-60 Black Hawk
B. AH-64 Apache
C. C-130 Hercules
D. F-16 Fighting Falcon
The C-130 Hercules is widely used for airborne operations due to its
cargo capacity and ability to conduct controlled jump operations.
5. What is the main function of the reserve static line?
A. Controls descent rate
B. Releases cargo bundles
C. Ensures automatic deployment of reserve parachute if needed
D. Stabilizes jumper during exit
The reserve static line is designed to automatically deploy the reserve
parachute in emergency situations.
6. What is the correct body position when exiting the aircraft?
A. Feet first, arms crossed
B. Chin tucked, elbows tight, feet and knees together
C. Head back, legs spread
D. Arms extended, legs bent backward
A proper exit position ensures stability and reduces the risk of
entanglement with equipment or other jumpers.
7. What is the minimum safe altitude for main parachute deployment in
static line jumps?
A. 500 feet
B. 800 feet
C. Approximately 1,250 feet AGL
, D. 3,000 feet AGL
Static line jumps are designed to deploy at around 1,250 feet above
ground level to ensure sufficient canopy time.
8. What does a “partial malfunction” refer to in parachuting?
A. Complete failure to exit aircraft
B. Reserve parachute deployment
C. Canopy deployed but not fully inflated or functioning correctly
D. Successful landing without injury
A partial malfunction occurs when the parachute opens but does not
function as intended, requiring corrective action.
9. What is the purpose of slipstream during exit?
A. Stabilize canopy
B. Assist parachute deployment and separation from aircraft
C. Reduce wind resistance on landing
D. Increase jump altitude
Slipstream airflow helps carry the jumper away from the aircraft and
initiates parachute deployment in static line jumps.
10. Which condition is most hazardous during airborne operations?
A. Clear skies
B. Light wind
C. High wind drift conditions
D. Calm atmospheric pressure
High wind drift can carry jumpers far off the drop zone, increasing
injury and navigation risks.
11. What is the function of the reserve handle?
A. Controls descent rate
B. Releases static line
C. Manually deploys the reserve parachute
D. Opens main canopy faster
