PN4001 Exam 1 Questions with Correct
Answers
Great caution should be used when braking at speeds above
80 KIAS
Most blown tires occur prior to spin up or below
40 KIAS
To avoid blown tires,
don't hold excessive brake pressure below 20 KIAS
Manually abort the start when
hot start, hung start, no start, BAT BUS illuminates, PCL moved out of ST
Ready
If start with external power is aborted...
do not attempt subsequent starts
If battery start aborted...
connect external power, motor run
Wait times between starts
30 secs, 2 min, 5 min, 30 min
What to do when FIRE light on ground?
, No need to confirm. Emergency Engine shutdown.
When do you emergency engine shutdown on ground?
"Don't chip your prop on a fiery surface"
CHIP light
Prop strike
Fire
Depart prepared surface
Emergency engine shutdown on the ground
PCL - OFF
FIREWALL SHUTOFF HANDLE - PULL
Abort
PCL - IDLE
BRAKES - AS REQUIRED
Engine Failure Immediately After Takeoff (Sufficient Runway Remaining
Straight Ahead)
AIRSPEED - 110 KNOTS (MINIMUM)
PCL - AS REQUIRED
EMER LDG GR HANDLE - PULL (AS REQUIRED)
N1 does not indicate speeds below
Answers
Great caution should be used when braking at speeds above
80 KIAS
Most blown tires occur prior to spin up or below
40 KIAS
To avoid blown tires,
don't hold excessive brake pressure below 20 KIAS
Manually abort the start when
hot start, hung start, no start, BAT BUS illuminates, PCL moved out of ST
Ready
If start with external power is aborted...
do not attempt subsequent starts
If battery start aborted...
connect external power, motor run
Wait times between starts
30 secs, 2 min, 5 min, 30 min
What to do when FIRE light on ground?
, No need to confirm. Emergency Engine shutdown.
When do you emergency engine shutdown on ground?
"Don't chip your prop on a fiery surface"
CHIP light
Prop strike
Fire
Depart prepared surface
Emergency engine shutdown on the ground
PCL - OFF
FIREWALL SHUTOFF HANDLE - PULL
Abort
PCL - IDLE
BRAKES - AS REQUIRED
Engine Failure Immediately After Takeoff (Sufficient Runway Remaining
Straight Ahead)
AIRSPEED - 110 KNOTS (MINIMUM)
PCL - AS REQUIRED
EMER LDG GR HANDLE - PULL (AS REQUIRED)
N1 does not indicate speeds below
