CCNA FINAL EXAM | COMPLETE PRACTICE QUESTIONS, ANSWERS & STUDY
GUIDE 2026/2027
What is the maximum distance a LAP should be from its controller before you need to install Cat6A or
better cable? - ANS ✔✔50 meters
The spine-leaf topology is an implementation of the three-tier hierarchical model. - ANS ✔✔False
Which stage of the QoS process involves scheduling transmission of packets from output queues? - ANS
✔✔Marketing
Which three messages are part of the DORA process? (Choose three.) - ANS ✔✔Discover, Offer,
Acknowledge
Which of the following best describes the basic command "show ospf <process-id> <area-id> database"?
- ANS ✔✔Displays the OSPF link state database.
What is the default administrative distance of OSPF? - ANS ✔✔110
Which of the following best describes the basic command "router ospf <process-id>"? - ANS ✔✔Enters
router configuration mode for an OSPF process.
Which of the following best describe the basic command "configure terminal"? - ANS ✔✔Enters global
configuration mode from privileged EXEC mode.
Which of the following best describes the basic command "network <network-address><wildcard-mask>
area <area-id>"? - ANS ✔✔Activates OSPF on the specified network and places the matching interface in
the specified area.
How can you view IP parameters on a Windows client? - ANS ✔✔Issue the ipconfig /all command at a
command prompt.
Which of the following best describes the basic command "ip address <ip address> <subnet-mask>"? -
ANS ✔✔Assigns an IP address to an interface
Single-mode fiber is used for long-haul communications. - ANS ✔✔True
What happens when a switch cannot find a MAC address table entry for an outgoing interface? - ANS
✔✔Flooding
Which Cisco IOS command enables you to check what VLAN a client is in? - ANS ✔✔show vlan
Which commands enable you to test network connectivity? (Choose two.) - ANS ✔✔traceroute, ping
Which of the following best describes the basic command "interface <type>"? - ANS ✔✔Changes from
global configuration mode to interface configuration mode
GUIDE 2026/2027
What is the maximum distance a LAP should be from its controller before you need to install Cat6A or
better cable? - ANS ✔✔50 meters
The spine-leaf topology is an implementation of the three-tier hierarchical model. - ANS ✔✔False
Which stage of the QoS process involves scheduling transmission of packets from output queues? - ANS
✔✔Marketing
Which three messages are part of the DORA process? (Choose three.) - ANS ✔✔Discover, Offer,
Acknowledge
Which of the following best describes the basic command "show ospf <process-id> <area-id> database"?
- ANS ✔✔Displays the OSPF link state database.
What is the default administrative distance of OSPF? - ANS ✔✔110
Which of the following best describes the basic command "router ospf <process-id>"? - ANS ✔✔Enters
router configuration mode for an OSPF process.
Which of the following best describe the basic command "configure terminal"? - ANS ✔✔Enters global
configuration mode from privileged EXEC mode.
Which of the following best describes the basic command "network <network-address><wildcard-mask>
area <area-id>"? - ANS ✔✔Activates OSPF on the specified network and places the matching interface in
the specified area.
How can you view IP parameters on a Windows client? - ANS ✔✔Issue the ipconfig /all command at a
command prompt.
Which of the following best describes the basic command "ip address <ip address> <subnet-mask>"? -
ANS ✔✔Assigns an IP address to an interface
Single-mode fiber is used for long-haul communications. - ANS ✔✔True
What happens when a switch cannot find a MAC address table entry for an outgoing interface? - ANS
✔✔Flooding
Which Cisco IOS command enables you to check what VLAN a client is in? - ANS ✔✔show vlan
Which commands enable you to test network connectivity? (Choose two.) - ANS ✔✔traceroute, ping
Which of the following best describes the basic command "interface <type>"? - ANS ✔✔Changes from
global configuration mode to interface configuration mode
