PERSONAL PROTECTIVE EQUIPMENT
(PPE) 150 Questions with Answers
PRACTICE EXAM REVIEWS WITH
COMPLETE ACTUAL EXAM QUESTIONS
AND CORRECT VERIFIED ANSWERS/
ALREADY GRADED A+ (MOST
RECENT!!)
SECTION 1: GENERAL PPE PRINCIPLES
1. What is the primary purpose of Personal Protective Equipment
(PPE)?
• A) To improve comfort in the workplace
• B) To reduce the likelihood of injuries and illnesses caused by
workplace hazards
• C) To comply with government regulations only
• D) To make employees look professional
Answer: B) To reduce the likelihood of injuries and illnesses caused
by workplace hazards
Rationale: PPE is designed to protect workers from health and safety
hazards by reducing exposure to risks that can cause injury or illness.
While compliance with regulations is important, the primary purpose
is worker protection .
,2. According to OSHA regulations, who is responsible for providing
PPE in the workplace?
• A) The employee
• B) The government
• C) The employer
• D) The safety officer
Answer: C) The employer
Rationale: Under OSHA regulations, employers are required to
provide necessary PPE to workers at no cost when workplace hazards
require it, ensuring workers are adequately protected .
3. When should PPE be used in the workplace?
• A) Only when an injury has occurred
• B) Only if the employee feels unsafe
• C) Whenever a workplace hazard cannot be eliminated or
controlled through other means
• D) Only in high-risk work environments
Answer: C) Whenever a workplace hazard cannot be eliminated or
controlled through other means
Rationale: PPE should be used as the last line of defense when
hazards cannot be avoided, eliminated, or sufficiently controlled
through engineering or administrative measures .
4. Which of the following is NOT considered PPE?
• A) Safety gloves
• B) Hard hats
, • C) Office chairs
• D) Safety boots
Answer: C) Office chairs
Rationale: PPE refers to equipment worn to minimize exposure to
workplace hazards, such as gloves, hard hats, and boots. Office chairs
are furniture, not protective equipment .
5. What should be done if a piece of PPE is damaged or defective?
• A) Continue using it until the end of the workday
• B) Repair it and continue using it
• C) Report it to the supervisor and replace it immediately
• D) Store it for later use
Answer: C) Report it to the supervisor and replace it immediately
Rationale: Damaged or defective PPE should be reported and
replaced immediately to ensure continued adequate protection from
hazards .
6. What is the hierarchy of hazard controls?
• A) PPE is the first line of defense
• B) PPE is the last line of defense
• C) PPE and engineering controls are equally important
• D) Administrative controls are always preferred
Answer: B) PPE is the last line of defense
Rationale: The hierarchy of controls prioritizes elimination,
substitution, engineering controls, administrative controls, and
, finally PPE as the last line of defense when other controls cannot
eliminate the hazard .
7. Training should include all of the following EXCEPT:
• A) What PPE is necessary
• B) When PPE is necessary
• C) How to modify the PPE
• D) Limitations of the PPE
Answer: C) How to modify the PPE
Rationale: Training should cover what PPE is necessary, when it is
necessary, and its limitations. Modifying PPE is not appropriate as it
can compromise protection and void manufacturer specifications .
8. PPE must be all of the following EXCEPT:
• A) Durable
• B) Of safe design
• C) Capable of being disinfected
• D) Fashionable
Answer: D) Fashionable
Rationale: PPE must be durable, of safe design, and capable of being
disinfected when required. Appearance is not a safety requirement .
9. What does the term "fit testing" mean in relation to PPE?
• A) Checking the material quality of the PPE
• B) Ensuring the PPE is comfortable for the worker
(PPE) 150 Questions with Answers
PRACTICE EXAM REVIEWS WITH
COMPLETE ACTUAL EXAM QUESTIONS
AND CORRECT VERIFIED ANSWERS/
ALREADY GRADED A+ (MOST
RECENT!!)
SECTION 1: GENERAL PPE PRINCIPLES
1. What is the primary purpose of Personal Protective Equipment
(PPE)?
• A) To improve comfort in the workplace
• B) To reduce the likelihood of injuries and illnesses caused by
workplace hazards
• C) To comply with government regulations only
• D) To make employees look professional
Answer: B) To reduce the likelihood of injuries and illnesses caused
by workplace hazards
Rationale: PPE is designed to protect workers from health and safety
hazards by reducing exposure to risks that can cause injury or illness.
While compliance with regulations is important, the primary purpose
is worker protection .
,2. According to OSHA regulations, who is responsible for providing
PPE in the workplace?
• A) The employee
• B) The government
• C) The employer
• D) The safety officer
Answer: C) The employer
Rationale: Under OSHA regulations, employers are required to
provide necessary PPE to workers at no cost when workplace hazards
require it, ensuring workers are adequately protected .
3. When should PPE be used in the workplace?
• A) Only when an injury has occurred
• B) Only if the employee feels unsafe
• C) Whenever a workplace hazard cannot be eliminated or
controlled through other means
• D) Only in high-risk work environments
Answer: C) Whenever a workplace hazard cannot be eliminated or
controlled through other means
Rationale: PPE should be used as the last line of defense when
hazards cannot be avoided, eliminated, or sufficiently controlled
through engineering or administrative measures .
4. Which of the following is NOT considered PPE?
• A) Safety gloves
• B) Hard hats
, • C) Office chairs
• D) Safety boots
Answer: C) Office chairs
Rationale: PPE refers to equipment worn to minimize exposure to
workplace hazards, such as gloves, hard hats, and boots. Office chairs
are furniture, not protective equipment .
5. What should be done if a piece of PPE is damaged or defective?
• A) Continue using it until the end of the workday
• B) Repair it and continue using it
• C) Report it to the supervisor and replace it immediately
• D) Store it for later use
Answer: C) Report it to the supervisor and replace it immediately
Rationale: Damaged or defective PPE should be reported and
replaced immediately to ensure continued adequate protection from
hazards .
6. What is the hierarchy of hazard controls?
• A) PPE is the first line of defense
• B) PPE is the last line of defense
• C) PPE and engineering controls are equally important
• D) Administrative controls are always preferred
Answer: B) PPE is the last line of defense
Rationale: The hierarchy of controls prioritizes elimination,
substitution, engineering controls, administrative controls, and
, finally PPE as the last line of defense when other controls cannot
eliminate the hazard .
7. Training should include all of the following EXCEPT:
• A) What PPE is necessary
• B) When PPE is necessary
• C) How to modify the PPE
• D) Limitations of the PPE
Answer: C) How to modify the PPE
Rationale: Training should cover what PPE is necessary, when it is
necessary, and its limitations. Modifying PPE is not appropriate as it
can compromise protection and void manufacturer specifications .
8. PPE must be all of the following EXCEPT:
• A) Durable
• B) Of safe design
• C) Capable of being disinfected
• D) Fashionable
Answer: D) Fashionable
Rationale: PPE must be durable, of safe design, and capable of being
disinfected when required. Appearance is not a safety requirement .
9. What does the term "fit testing" mean in relation to PPE?
• A) Checking the material quality of the PPE
• B) Ensuring the PPE is comfortable for the worker
