Practice Questions with Verified
Answers. GRADED A+. Latest
2026/2027 Update
True - Answer ✔✔-The firefighter may be installed next to a stand-alone battery
smoke detector
False - Answer ✔✔-When performing a full system test, you may bypass any
open doors or windows
Always enable the emergency - Answer ✔✔-When programming an skey1,you
must
, False - Answer ✔✔-When running power to the take345,polarity doesn't apply
Audible alarm (7) - Answer ✔✔-When programming the emergency key for the
skey1,which zone/sensor type is used.
True - Answer ✔✔-When installing a smkt3,you must use the included screws
and anchors
True - Answer ✔✔-When installing the firefighter, it is required to test the
customers existing smoke detectors
Between 6"(15cm) and 2'(61cm) from floor - Answer ✔✔-When installing a
Dw21, where is the approved location for the sensor
Provided double sided tape - Answer ✔✔-When installing a dw11 on a vinyl or
metal frame, what should primarily use to mount the sensor
Beans & wire caps - Answer ✔✔-Which of the following materials can you use to
group multiple ground terminals in a takeover.