NY Metal Coil Endorsement Practice
Latest ,recent and frequently tested exam
with comprehensive questions and
verified accurate solution (detailed &
elaborated) GRADED A+
Professional Academic Assistance Services
Services Offered
Proctored Exam Assistance
Online Class Management (Full Course Support)
Exam Preparation & Study Materials
Assignments and Coursework Support
Essays and Research Papers
Discussion Posts and Replies
CONTACT INFORMATION
WHATSAPPLINK- https://wa.me/254784769540
, How are tiedowns used to secure a row of metal coils with eyes vertical on a flatbed vehicle with anchor
points? - correct ans:At least one direct tiedown against the front of the row of coils (to restrain against
forward motion) and at least one other direct tiedown against the rear of the row (to restrain against
rearward motion), making an angle of 45 degrees or less with the floor. At least one indirect tiedown
over the top of each coil or side by sire row of coils (to restrain against vertical motion).
Transportation of one or more metal coils weighing 5,000 pounds or more, individually or bundled
together, must comply with all of the following EXCEPT - correct ans:General cargo securement rules for
flatbed vehicles, van-type vehicles or intermodal containers that have anchor points.
To transport several metal coils whose combined aggregate weight is 4,000 pounds on pallets on a
flatbed trailer, which of the following is NOT required to be met? - correct ans:Metal coil endorsement
on the CDL
The aggregate working load limit of all indirect tiedowns is - correct ans:The sum of the working load
limits for each indirect tiedown
The sum of the working load limits (WLL) from all tiedowns must be at least _____ of the weight of the
cargo. - correct ans:50%
_________ is an effective way to prevent rolling and provides the most restraining force. - correct ans:A
cradle that has an angle oof 45 degrees
Suppose that only two direct tiedowns are used. Both are attached to one side of the vehicle only, and
each has a working load limit of 6,000 pounds. Then the aggregate working load limit for the two
tiedowns is - correct ans:6000 lbs
If you're using indirect tiedowns but friction is low between the deck and the cargo, consider using -
correct ans:any of the above
direct tiedowns
Friction mats or other friction enhancing devices
Latest ,recent and frequently tested exam
with comprehensive questions and
verified accurate solution (detailed &
elaborated) GRADED A+
Professional Academic Assistance Services
Services Offered
Proctored Exam Assistance
Online Class Management (Full Course Support)
Exam Preparation & Study Materials
Assignments and Coursework Support
Essays and Research Papers
Discussion Posts and Replies
CONTACT INFORMATION
WHATSAPPLINK- https://wa.me/254784769540
, How are tiedowns used to secure a row of metal coils with eyes vertical on a flatbed vehicle with anchor
points? - correct ans:At least one direct tiedown against the front of the row of coils (to restrain against
forward motion) and at least one other direct tiedown against the rear of the row (to restrain against
rearward motion), making an angle of 45 degrees or less with the floor. At least one indirect tiedown
over the top of each coil or side by sire row of coils (to restrain against vertical motion).
Transportation of one or more metal coils weighing 5,000 pounds or more, individually or bundled
together, must comply with all of the following EXCEPT - correct ans:General cargo securement rules for
flatbed vehicles, van-type vehicles or intermodal containers that have anchor points.
To transport several metal coils whose combined aggregate weight is 4,000 pounds on pallets on a
flatbed trailer, which of the following is NOT required to be met? - correct ans:Metal coil endorsement
on the CDL
The aggregate working load limit of all indirect tiedowns is - correct ans:The sum of the working load
limits for each indirect tiedown
The sum of the working load limits (WLL) from all tiedowns must be at least _____ of the weight of the
cargo. - correct ans:50%
_________ is an effective way to prevent rolling and provides the most restraining force. - correct ans:A
cradle that has an angle oof 45 degrees
Suppose that only two direct tiedowns are used. Both are attached to one side of the vehicle only, and
each has a working load limit of 6,000 pounds. Then the aggregate working load limit for the two
tiedowns is - correct ans:6000 lbs
If you're using indirect tiedowns but friction is low between the deck and the cargo, consider using -
correct ans:any of the above
direct tiedowns
Friction mats or other friction enhancing devices
