SACA Certification C-101
Study online at https://quizlet.com/_eg7aup
1. Function The three Fs of product design are form, fit and __________.
2. Lean Manufacturing High product quality, quick delivery, low costs are the primary goals of what
system?
3. Standardize Which 5S step involves formatting 5S work instructions so that they look
and read alike?
4. Reduces the waste of How does the 5S method aid in the goal of lean manufacturing?
excess motion, helps
improve morale, and
enables other lean
methods to be more
successful
5. HMI What is the interface used with CNC machines to load and monitor pro-
grams?
6. PLC The automation of many different manufacturing processes is done
through the use of a small computer called a __________.
7. An error message. When a machine stops due to an problem, what would the machine's HMI
typically display?
8. Industry 4.0 Smart sensors connected to manufacturing networks creates what level of
Industry?
9. Ethernet What standard introduced in the early 1980s established a method to
physically connect machines from different manufacturers enabling them
to communicate to one another?
10. Predictive mainte- Which IIoT application monitors equipment during normal operation to
nance prevent failures to the equipment?
, SACA Certification C-101
Study online at https://quizlet.com/_eg7aup
11. Standards Occupational Safety and Health Administration(OSHA) develops
__________ for safety retail and service industries to construction and
manufacturing.
12. True The regulation that requires manufacturers to document and report infor-
mation on the types of chemicals they use, store, release into the environ-
ment, or dispose of is known as EPCRA. Is this statement TRUE or FALSE?
13. Computers The use of ___________________marked the advent of the third industrial
revolution?
14. Notify a supervisor If an operator knows a safety problem exists with a machine, the operator
immediately should __________.
15. Emergency stop A(n) __________ is a device or system that shuts down a machine imme-
diately if the operator is in danger.
16. It is closed If the energy sources are shut down, what would this mean for a pneumatic
valve?
17. 1. Shut down the What are the 5 steps of electrical Lockout/tagout
equipment
2.Connect Hasp
3. Attach Lock
4. Add Tag
5. Test Start Equip-
ment
18. Falls Which of the following is a common cause of workplace death?
19. Hazard assessment The process of identifying potential hazards in the workplace is known as a
__________.
20. TRUE
Study online at https://quizlet.com/_eg7aup
1. Function The three Fs of product design are form, fit and __________.
2. Lean Manufacturing High product quality, quick delivery, low costs are the primary goals of what
system?
3. Standardize Which 5S step involves formatting 5S work instructions so that they look
and read alike?
4. Reduces the waste of How does the 5S method aid in the goal of lean manufacturing?
excess motion, helps
improve morale, and
enables other lean
methods to be more
successful
5. HMI What is the interface used with CNC machines to load and monitor pro-
grams?
6. PLC The automation of many different manufacturing processes is done
through the use of a small computer called a __________.
7. An error message. When a machine stops due to an problem, what would the machine's HMI
typically display?
8. Industry 4.0 Smart sensors connected to manufacturing networks creates what level of
Industry?
9. Ethernet What standard introduced in the early 1980s established a method to
physically connect machines from different manufacturers enabling them
to communicate to one another?
10. Predictive mainte- Which IIoT application monitors equipment during normal operation to
nance prevent failures to the equipment?
, SACA Certification C-101
Study online at https://quizlet.com/_eg7aup
11. Standards Occupational Safety and Health Administration(OSHA) develops
__________ for safety retail and service industries to construction and
manufacturing.
12. True The regulation that requires manufacturers to document and report infor-
mation on the types of chemicals they use, store, release into the environ-
ment, or dispose of is known as EPCRA. Is this statement TRUE or FALSE?
13. Computers The use of ___________________marked the advent of the third industrial
revolution?
14. Notify a supervisor If an operator knows a safety problem exists with a machine, the operator
immediately should __________.
15. Emergency stop A(n) __________ is a device or system that shuts down a machine imme-
diately if the operator is in danger.
16. It is closed If the energy sources are shut down, what would this mean for a pneumatic
valve?
17. 1. Shut down the What are the 5 steps of electrical Lockout/tagout
equipment
2.Connect Hasp
3. Attach Lock
4. Add Tag
5. Test Start Equip-
ment
18. Falls Which of the following is a common cause of workplace death?
19. Hazard assessment The process of identifying potential hazards in the workplace is known as a
__________.
20. TRUE
