DOT Compliance and Safety Exam
Practice Text Questions (Actual Exam
2026-2027) Correct Detailed & Verified
ANSWERS (100% Accurate Solutions)
ALREADY GRADED A+||NEWEST
VERSION Of The Exam Guarantee
Pass!!
1. Which federal agency primarily regulates commercial motor
vehicle safety in the United States?
A. OSHA
B. NHTSA
C. FMCSA
D. EPA
The Federal Motor Carrier Safety Administration (FMCSA) is
responsible for regulating and enforcing safety standards for
commercial motor vehicles and motor carriers.
2. The primary purpose of DOT compliance regulations is to:
A. Increase freight costs
B. Limit transportation businesses
C. Improve highway safety and reduce crashes involving
commercial vehicles
D. Eliminate all vehicle inspections
,DOT regulations are designed to prevent crashes, injuries, and
fatalities by establishing safety requirements.
3. A commercial driver must possess which document to legally
operate a CMV?
A. Passport
B. Medical insurance card
C. Commercial Driver’s License (CDL), when required
D. Vehicle registration only
Drivers operating vehicles meeting CDL requirements must have the
appropriate CDL.
4. Which regulation governs hours-of-service requirements for
property-carrying drivers?
A. Part 382
B. Part 391
C. Part 395
D. Part 396
49 CFR Part 395 establishes hours-of-service limits to reduce driver
fatigue.
5. The maximum driving time allowed after 10 consecutive hours
off duty for most property-carrying drivers is:
A. 8 hours
B. 10 hours
C. 11 hours
D. 14 hours
, Most property-carrying CMV drivers may drive up to 11 hours
following 10 consecutive hours off duty.
6. The 14-hour duty window begins when a driver:
A. Starts driving
B. Fuels the vehicle
C. Begins any work-related activity after the required rest period
D. Completes the first delivery
The 14-hour limit starts when the driver begins work and cannot be
extended by taking breaks.
7. The purpose of a pre-trip inspection is to:
A. Reduce fuel costs
B. Increase delivery speed
C. Identify safety defects before operation
D. Avoid paperwork
Pre-trip inspections help identify mechanical issues that could cause
crashes or violations.
8. Which regulation covers vehicle inspection, repair, and
maintenance?
A. Part 383
B. Part 390
C. Part 396
D. Part 397
49 CFR Part 396 establishes inspection, repair, and maintenance
requirements.
Practice Text Questions (Actual Exam
2026-2027) Correct Detailed & Verified
ANSWERS (100% Accurate Solutions)
ALREADY GRADED A+||NEWEST
VERSION Of The Exam Guarantee
Pass!!
1. Which federal agency primarily regulates commercial motor
vehicle safety in the United States?
A. OSHA
B. NHTSA
C. FMCSA
D. EPA
The Federal Motor Carrier Safety Administration (FMCSA) is
responsible for regulating and enforcing safety standards for
commercial motor vehicles and motor carriers.
2. The primary purpose of DOT compliance regulations is to:
A. Increase freight costs
B. Limit transportation businesses
C. Improve highway safety and reduce crashes involving
commercial vehicles
D. Eliminate all vehicle inspections
,DOT regulations are designed to prevent crashes, injuries, and
fatalities by establishing safety requirements.
3. A commercial driver must possess which document to legally
operate a CMV?
A. Passport
B. Medical insurance card
C. Commercial Driver’s License (CDL), when required
D. Vehicle registration only
Drivers operating vehicles meeting CDL requirements must have the
appropriate CDL.
4. Which regulation governs hours-of-service requirements for
property-carrying drivers?
A. Part 382
B. Part 391
C. Part 395
D. Part 396
49 CFR Part 395 establishes hours-of-service limits to reduce driver
fatigue.
5. The maximum driving time allowed after 10 consecutive hours
off duty for most property-carrying drivers is:
A. 8 hours
B. 10 hours
C. 11 hours
D. 14 hours
, Most property-carrying CMV drivers may drive up to 11 hours
following 10 consecutive hours off duty.
6. The 14-hour duty window begins when a driver:
A. Starts driving
B. Fuels the vehicle
C. Begins any work-related activity after the required rest period
D. Completes the first delivery
The 14-hour limit starts when the driver begins work and cannot be
extended by taking breaks.
7. The purpose of a pre-trip inspection is to:
A. Reduce fuel costs
B. Increase delivery speed
C. Identify safety defects before operation
D. Avoid paperwork
Pre-trip inspections help identify mechanical issues that could cause
crashes or violations.
8. Which regulation covers vehicle inspection, repair, and
maintenance?
A. Part 383
B. Part 390
C. Part 396
D. Part 397
49 CFR Part 396 establishes inspection, repair, and maintenance
requirements.
