NFPA 70E FINAL EXAM |ACTUAL EXAM QUESTIONS WITH WELL DETAILED
CORRECT ANSWERS|GRADED A+|BRAND NEW 2026/2027 UPDATE
Study online at https://quizlet.com/_joz245
1. What does the general duty clause of Provide a workplace free from recognized haz-
the Occupational Safety and Health Act ards
require of employers?
2. What do safety-related work practices The cell line is not grounded through the welding
require regarding cell lines? machine.
3. You are going to conduct battery activi- Eye wash facilities
ties that will require you to handle liquid
electrolyte. What protective equipment
must be available to you?
4. What is required before employees be- Job briefing
gin a new project?
5. Which approach limit is at the point Prohibited Approach Boundary
where work is the same as making con-
tact with the live part?
6. How is arc rating derived? Value of the arc thermal performance value (ATV)
or energy of breakopen threshold
7. You are required to verify an electrically Determine all possible sources of electrical sup-
safe work condition at a worksite. What ply to the equipment
is the first step you will take when initi-
ating the process?
8. Which of the following statement is Barricades cannot be placed closer than the lim-
True about Barricades? ited approach boundar
9. How often should you do a visual in- Before each use
spection of test instruments and equip-
ment?
1/3
CORRECT ANSWERS|GRADED A+|BRAND NEW 2026/2027 UPDATE
Study online at https://quizlet.com/_joz245
1. What does the general duty clause of Provide a workplace free from recognized haz-
the Occupational Safety and Health Act ards
require of employers?
2. What do safety-related work practices The cell line is not grounded through the welding
require regarding cell lines? machine.
3. You are going to conduct battery activi- Eye wash facilities
ties that will require you to handle liquid
electrolyte. What protective equipment
must be available to you?
4. What is required before employees be- Job briefing
gin a new project?
5. Which approach limit is at the point Prohibited Approach Boundary
where work is the same as making con-
tact with the live part?
6. How is arc rating derived? Value of the arc thermal performance value (ATV)
or energy of breakopen threshold
7. You are required to verify an electrically Determine all possible sources of electrical sup-
safe work condition at a worksite. What ply to the equipment
is the first step you will take when initi-
ating the process?
8. Which of the following statement is Barricades cannot be placed closer than the lim-
True about Barricades? ited approach boundar
9. How often should you do a visual in- Before each use
spection of test instruments and equip-
ment?
1/3
