NFPA 99 MEDICAL GAS 6020 (LATEST 2026/2027)
QUESTIONS AND VERIFIED ANSWERS | GRADED A+
| GUARANTEED PASS!!
A relief valve will be located between each final line regulator
and source valve, they sure have a setting a 50% above
normal system operating pressure. 5.1.3.5.6.3 page 31 -
<<<Answers>>>Central supply system for positive pressure
relief valves, include one or more relief valve, all meeting the
following requirements
Name of the gas or chemical symbol, gas or vacuum system
color code, if operating at pressures other than standard gauge
pressure labeling must indicate operating pressure. labeled
every 20 feet. 5.1.11.1.1 page 57 and 5.1.3.5. 6.4 page 31. -
<<<Answers>>>How should a relief valve vent line be
labeled when venting outside and how will help distinguish
them from the medical gas pipeline?
Air compressor systems, medical surgical vacuum pump
systems, WAGD systems, instrument air systems, and
proportioning systems. 5.1.9.5 page 49 -
<<<Answers>>>Local alarm shall be installed to monitor the
functions of what systems?
,Thank you for Purchasing this exam
Study Guide. We provide high-
quality academic materials to help
students excel in exams. Our other
Services include but not limited to:
academic research, University &
College assignments writing, essay
writing, Online Classes, and research
projects. Our services are reliable,
affordable, and plagiarism-free. All
the Best in your Exam. For more
information; Contact us at:
or
0R
+254 741484450
Medical air dewpoint 35° instrument
air dewpoint -22° high carbon level
, 10 ppm's or higher Proportioning
systems 19.5 to23.5% oxygen range.
Medical air/WAGD reserve under the man if pump ceases to
operate
5.1.9.5.4 page 50 - <<<Answers>>>The local alarm will
activate when the following will happens?
Eight hours 5.1.10.4.3.13 page 52 - <<<Answers>>>Joints
shall be brazed within _______hours after surfaces are clean
for breezing.
Rolled smooth or deburred, chips 5.1.10.4.2.3 page 52 -
<<<Answers>>>The cut ends of tubes shall be permitted to be
___________ with a sharp, clean deburring tool, to
prevent__________ from entering the tube.
Flared and compression type connectors including station in
Lipton outlets, other straight thread connections including
unions, pipe crimping tools, removable and non-removable
push fit fittings that employ a quick assembly push foot
connector 5.1.10.10 page 54 - <<<Answers>>>The following
4 joints shall be prohibited throughout medical gas and
vacuum distribution pipeline systems.
Plugged or capped my manufacturer 5.1.10.1.2 page 50 -
<<<Answers>>>All the tubes fittings, valves, and other
QUESTIONS AND VERIFIED ANSWERS | GRADED A+
| GUARANTEED PASS!!
A relief valve will be located between each final line regulator
and source valve, they sure have a setting a 50% above
normal system operating pressure. 5.1.3.5.6.3 page 31 -
<<<Answers>>>Central supply system for positive pressure
relief valves, include one or more relief valve, all meeting the
following requirements
Name of the gas or chemical symbol, gas or vacuum system
color code, if operating at pressures other than standard gauge
pressure labeling must indicate operating pressure. labeled
every 20 feet. 5.1.11.1.1 page 57 and 5.1.3.5. 6.4 page 31. -
<<<Answers>>>How should a relief valve vent line be
labeled when venting outside and how will help distinguish
them from the medical gas pipeline?
Air compressor systems, medical surgical vacuum pump
systems, WAGD systems, instrument air systems, and
proportioning systems. 5.1.9.5 page 49 -
<<<Answers>>>Local alarm shall be installed to monitor the
functions of what systems?
,Thank you for Purchasing this exam
Study Guide. We provide high-
quality academic materials to help
students excel in exams. Our other
Services include but not limited to:
academic research, University &
College assignments writing, essay
writing, Online Classes, and research
projects. Our services are reliable,
affordable, and plagiarism-free. All
the Best in your Exam. For more
information; Contact us at:
or
0R
+254 741484450
Medical air dewpoint 35° instrument
air dewpoint -22° high carbon level
, 10 ppm's or higher Proportioning
systems 19.5 to23.5% oxygen range.
Medical air/WAGD reserve under the man if pump ceases to
operate
5.1.9.5.4 page 50 - <<<Answers>>>The local alarm will
activate when the following will happens?
Eight hours 5.1.10.4.3.13 page 52 - <<<Answers>>>Joints
shall be brazed within _______hours after surfaces are clean
for breezing.
Rolled smooth or deburred, chips 5.1.10.4.2.3 page 52 -
<<<Answers>>>The cut ends of tubes shall be permitted to be
___________ with a sharp, clean deburring tool, to
prevent__________ from entering the tube.
Flared and compression type connectors including station in
Lipton outlets, other straight thread connections including
unions, pipe crimping tools, removable and non-removable
push fit fittings that employ a quick assembly push foot
connector 5.1.10.10 page 54 - <<<Answers>>>The following
4 joints shall be prohibited throughout medical gas and
vacuum distribution pipeline systems.
Plugged or capped my manufacturer 5.1.10.1.2 page 50 -
<<<Answers>>>All the tubes fittings, valves, and other
