IEC YEAR 2 MIDTERM EXAM |COMPLETE QUESTIONS WITH 100%
RATED EXPERT SOLUTIONS |2026 LATEST UPDATED
Which of the following installations are NOT covered by the NEC?
-Bolivar ferry boats
-Sprint towers used for cell phone signal transmission
-Southwest Airlines Jets such as 737's
-Reliant/HLandP power lines and equipment located in property easements along streets -
(answer)None of the above
A continuous load is any load that operates for _______. - (answer)3 hours or more
The water pump motor for a coin-operated car wash would be considered to be a _____ load. -
(answer)noncontinuous
Improper electrical terminations lead to increased _____.
-A. Circuit resistance
-B. voltage dropped across the terminations
-C. Circuit current - (answer)a and b only
,When setting the range on a DMM for a voltage measurement, if the expected voltage to be
measured is 480 volts DC, the range setting should be set on_____. - (answer)600v---
A DMM is set for a voltage measurement and the range is set to 200v. If the voltage to be
measured is 277 volts, the LCD will display_____. - (answer)OL
Safety toe footwear for employees shall meet the requirements and the specifications of _____. -
(answer)ANSI
The maximum permissible noise exposure level, at 97 db, is _____ hours. - (answer)3
Employees whose vision requires use of corrective lenses in spectacles shall be provided with
eye protection in the form of _____.
-A. optically corrected spectacles.
-B. over-spectacle-type goggles
- C. goggles with corrective lenses - (answer)any of these
There are ____ chapters in the 2004 edition of the NFPA 70E. - (answer)4
, When working on live or energized equipment, conductive _____ is permitted to be worn.
- A. jewelry
-B. clothing - (answer)neither a or b
Employees shall maintain any saftey data sheets (SDS) for hazardous _____. -
(answer)chemicals
The chemical distributor, manufacturer, or importer shall ensure that each container of hazardous
chemical leaving the workplace has the identity of the hazardous chemical _______.
-A. labeled
-.B tagged
-C. marked - (answer)any of these
Employers shall provide employees with _____ information and training on hazardous chemicals
in the work area at the time of their initial assignment. - (answer)effective
Where one or more complete paragraphs from the previous edition of the NRC have been deleted
in the current edition, the deletion is identified by ____ between the remaining paragraphs. -
(answer)a bullet
RATED EXPERT SOLUTIONS |2026 LATEST UPDATED
Which of the following installations are NOT covered by the NEC?
-Bolivar ferry boats
-Sprint towers used for cell phone signal transmission
-Southwest Airlines Jets such as 737's
-Reliant/HLandP power lines and equipment located in property easements along streets -
(answer)None of the above
A continuous load is any load that operates for _______. - (answer)3 hours or more
The water pump motor for a coin-operated car wash would be considered to be a _____ load. -
(answer)noncontinuous
Improper electrical terminations lead to increased _____.
-A. Circuit resistance
-B. voltage dropped across the terminations
-C. Circuit current - (answer)a and b only
,When setting the range on a DMM for a voltage measurement, if the expected voltage to be
measured is 480 volts DC, the range setting should be set on_____. - (answer)600v---
A DMM is set for a voltage measurement and the range is set to 200v. If the voltage to be
measured is 277 volts, the LCD will display_____. - (answer)OL
Safety toe footwear for employees shall meet the requirements and the specifications of _____. -
(answer)ANSI
The maximum permissible noise exposure level, at 97 db, is _____ hours. - (answer)3
Employees whose vision requires use of corrective lenses in spectacles shall be provided with
eye protection in the form of _____.
-A. optically corrected spectacles.
-B. over-spectacle-type goggles
- C. goggles with corrective lenses - (answer)any of these
There are ____ chapters in the 2004 edition of the NFPA 70E. - (answer)4
, When working on live or energized equipment, conductive _____ is permitted to be worn.
- A. jewelry
-B. clothing - (answer)neither a or b
Employees shall maintain any saftey data sheets (SDS) for hazardous _____. -
(answer)chemicals
The chemical distributor, manufacturer, or importer shall ensure that each container of hazardous
chemical leaving the workplace has the identity of the hazardous chemical _______.
-A. labeled
-.B tagged
-C. marked - (answer)any of these
Employers shall provide employees with _____ information and training on hazardous chemicals
in the work area at the time of their initial assignment. - (answer)effective
Where one or more complete paragraphs from the previous edition of the NRC have been deleted
in the current edition, the deletion is identified by ____ between the remaining paragraphs. -
(answer)a bullet
