ICC Fire Inspector II Certification Exam
Questions And Correct Answers
(Verified Answers) Plus Rationales 2026
Q&A | Instant Download Pdf
1.
During a fire inspection, which document most accurately verifies the fire-
resistance rating of an installed fire door assembly?
A. Manufacturer’s brochure
B. Invoice from the supplier
C. Listing label on the door
D. Architect’s notes
The listing label confirms third-party testing and compliance, which
inspectors must rely on for verification.
2.
Which code requires maintenance of means of egress in existing buildings?
A. IFC Chapter 3
B. IFC Chapter 10
,C. IBC Chapter 7
D. IFC Chapter 50
Chapter 10 of the IFC covers means of egress requirements for both new
and existing buildings.
3.
The maximum travel distance to a Class I standpipe hose connection in a
high-rise must comply with which code?
A. NFPA 101
B. IFC Section 905
C. NFPA 14 alone
D. IBC Section 1103
IFC Section 905 governs standpipes, including hose connection placement
and travel distance.
4.
During plan review, what is the inspector verifying when examining
occupant load calculations?
A. Fire flow
B. Adequate egress capacity
C. Fire alarm circuiting
D. HVAC duct routing
Occupant load determines the number and width of required egress
components.
,5.
Which type of fire extinguisher is required for commercial cooking
operations with deep fat fryers?
A. CO₂
B. ABC dry chemical
C. Class K
D. Halotron
Class K extinguishers are designed for high-temperature cooking oils and
fats.
6.
What is the primary purpose of a fire wall?
A. Prevent smoke migration
B. Provide complete structural separation
C. Stop radiant heat
D. Support roof systems
A fire wall allows structural independence and fire-resistance separation to
limit building area.
7.
A fire alarm system requiring occupant notification must comply with which
standard?
A. NFPA 10
B. NFPA 72
, C. NFPA 1
D. IFC Chapter 50
NFPA 72 sets requirements for fire alarm design, installation, and
performance.
8.
Horizontal exits require protected corridors leading to them because:
A. Ventilation must be increased
B. Separation is required from the fire area
C. Elevators must remain operational
D. Lighting is optional
Protected corridors ensure occupants move from danger into a fire-
resistance-rated refuge area.
9.
The inspector must determine fire flow using which reference?
A. IBC Chapter 9
B. Local zoning regulations
C. IFC Appendix B (if adopted)
D. NFPA 10
Appendix B of the IFC provides fire-flow calculation methods when
adopted.
10.
Questions And Correct Answers
(Verified Answers) Plus Rationales 2026
Q&A | Instant Download Pdf
1.
During a fire inspection, which document most accurately verifies the fire-
resistance rating of an installed fire door assembly?
A. Manufacturer’s brochure
B. Invoice from the supplier
C. Listing label on the door
D. Architect’s notes
The listing label confirms third-party testing and compliance, which
inspectors must rely on for verification.
2.
Which code requires maintenance of means of egress in existing buildings?
A. IFC Chapter 3
B. IFC Chapter 10
,C. IBC Chapter 7
D. IFC Chapter 50
Chapter 10 of the IFC covers means of egress requirements for both new
and existing buildings.
3.
The maximum travel distance to a Class I standpipe hose connection in a
high-rise must comply with which code?
A. NFPA 101
B. IFC Section 905
C. NFPA 14 alone
D. IBC Section 1103
IFC Section 905 governs standpipes, including hose connection placement
and travel distance.
4.
During plan review, what is the inspector verifying when examining
occupant load calculations?
A. Fire flow
B. Adequate egress capacity
C. Fire alarm circuiting
D. HVAC duct routing
Occupant load determines the number and width of required egress
components.
,5.
Which type of fire extinguisher is required for commercial cooking
operations with deep fat fryers?
A. CO₂
B. ABC dry chemical
C. Class K
D. Halotron
Class K extinguishers are designed for high-temperature cooking oils and
fats.
6.
What is the primary purpose of a fire wall?
A. Prevent smoke migration
B. Provide complete structural separation
C. Stop radiant heat
D. Support roof systems
A fire wall allows structural independence and fire-resistance separation to
limit building area.
7.
A fire alarm system requiring occupant notification must comply with which
standard?
A. NFPA 10
B. NFPA 72
, C. NFPA 1
D. IFC Chapter 50
NFPA 72 sets requirements for fire alarm design, installation, and
performance.
8.
Horizontal exits require protected corridors leading to them because:
A. Ventilation must be increased
B. Separation is required from the fire area
C. Elevators must remain operational
D. Lighting is optional
Protected corridors ensure occupants move from danger into a fire-
resistance-rated refuge area.
9.
The inspector must determine fire flow using which reference?
A. IBC Chapter 9
B. Local zoning regulations
C. IFC Appendix B (if adopted)
D. NFPA 10
Appendix B of the IFC provides fire-flow calculation methods when
adopted.
10.
