ISQS 3344 COMPREHENSIVE EXAM 2026/2027
QUESTIONS AND SOLUTIONS RATED A+
✔✔Balancing a work cell is done: - ✔✔as part of the process of building an efficient
work cell.
✔✔Cross-docking refers to which of the following? - ✔✔Avoid placing materials or
supplies in storage by processing them as they are received.
✔✔ASRS stands for which of the following? - ✔✔automated storage and retrieval
system
✔✔Balancing low-cost storage with low-cost material handling is important in which of
the following? - ✔✔warehouse layout
✔✔A big advantage of a process-oriented layout is: - ✔✔its flexibility in equipment and
labor assignments
✔✔(T/F) Cycle time is the maximum time that the product is allowed at each workstation
- ✔✔True
✔✔(T/F) A focused work center is well suited to the production of a large family of
products requiring similar processing, even if their demands are not very stable. -
✔✔False
✔✔(T/F) A fabrication line and an assembly line are both types of repetitive and
product-focused layout, but only the fabrication line utilizes workstations. - ✔✔False
✔✔Cycle time is computed as: - ✔✔daily operating time divided by the scheduled
output
✔✔Ambient conditions; spatial layout and functionality; and signs, symbols, and
artifacts are all: - ✔✔elements of successful servicescapes
✔✔"A special arrangement of machinery and equipment to focus on production of a
single product or group of related products" describes what layout type? - ✔✔work cell
✔✔(T/F) Category management is the use of computer software to evaluate the
profitability of various merchandising plans for hundreds of categories. - ✔✔True
✔✔A good layout requires determining:
A. material handling equipment.
B. capacity and space requirements.
, C. environment and aesthetics.
D. cost of moving between various work areas.
E. All of these - ✔✔E. All of these
✔✔In assembly-line balancing, cycle time (the ratio of available production time to
scheduled production) is the: - ✔✔maximum time that a product is allowed at each
workstation.
✔✔For which of the following operations would a fixed-position layout be MOST
appropriate? - ✔✔constructing a highway tunnel
✔✔As tool using animals, human performance is affected by:
A. noise, illumination, vibration
B. temp, humidity, air quality
C. strength, reflexes, perception,
D. design of pedal, levers, and buttons.
E. All of the above - ✔✔E. All of the above
✔✔Among the advantages of predetermined time standards are all EXCEPT which of
the following? - ✔✔They can only be determined after work actually takes place.
✔✔Flow diagrams are used to analyze: - ✔✔movement of people or material.
✔✔Ethical work environment decisions by managers may be guided by which of the
following?
A. state agencies
B. trade associations
C. insurers
D. employees
E. All of the above - ✔✔E. All of the above
✔✔An advantage of work sampling is that: - ✔✔the time spent observing the employee
is relatively short
✔✔Activity charts help analyze: - ✔✔utilization of an operator and machine
✔✔A disadvantage of work sampling is that: - ✔✔it tends to be less accurate,
particularly when task times are short.
✔✔A manufacturing plant allows its engineers to come in at 7 A.M. plus or minus an
hour but still requires them to work 8-hour days. Which of the following scheduling
techniques is the firm employing? - ✔✔flextime
QUESTIONS AND SOLUTIONS RATED A+
✔✔Balancing a work cell is done: - ✔✔as part of the process of building an efficient
work cell.
✔✔Cross-docking refers to which of the following? - ✔✔Avoid placing materials or
supplies in storage by processing them as they are received.
✔✔ASRS stands for which of the following? - ✔✔automated storage and retrieval
system
✔✔Balancing low-cost storage with low-cost material handling is important in which of
the following? - ✔✔warehouse layout
✔✔A big advantage of a process-oriented layout is: - ✔✔its flexibility in equipment and
labor assignments
✔✔(T/F) Cycle time is the maximum time that the product is allowed at each workstation
- ✔✔True
✔✔(T/F) A focused work center is well suited to the production of a large family of
products requiring similar processing, even if their demands are not very stable. -
✔✔False
✔✔(T/F) A fabrication line and an assembly line are both types of repetitive and
product-focused layout, but only the fabrication line utilizes workstations. - ✔✔False
✔✔Cycle time is computed as: - ✔✔daily operating time divided by the scheduled
output
✔✔Ambient conditions; spatial layout and functionality; and signs, symbols, and
artifacts are all: - ✔✔elements of successful servicescapes
✔✔"A special arrangement of machinery and equipment to focus on production of a
single product or group of related products" describes what layout type? - ✔✔work cell
✔✔(T/F) Category management is the use of computer software to evaluate the
profitability of various merchandising plans for hundreds of categories. - ✔✔True
✔✔A good layout requires determining:
A. material handling equipment.
B. capacity and space requirements.
, C. environment and aesthetics.
D. cost of moving between various work areas.
E. All of these - ✔✔E. All of these
✔✔In assembly-line balancing, cycle time (the ratio of available production time to
scheduled production) is the: - ✔✔maximum time that a product is allowed at each
workstation.
✔✔For which of the following operations would a fixed-position layout be MOST
appropriate? - ✔✔constructing a highway tunnel
✔✔As tool using animals, human performance is affected by:
A. noise, illumination, vibration
B. temp, humidity, air quality
C. strength, reflexes, perception,
D. design of pedal, levers, and buttons.
E. All of the above - ✔✔E. All of the above
✔✔Among the advantages of predetermined time standards are all EXCEPT which of
the following? - ✔✔They can only be determined after work actually takes place.
✔✔Flow diagrams are used to analyze: - ✔✔movement of people or material.
✔✔Ethical work environment decisions by managers may be guided by which of the
following?
A. state agencies
B. trade associations
C. insurers
D. employees
E. All of the above - ✔✔E. All of the above
✔✔An advantage of work sampling is that: - ✔✔the time spent observing the employee
is relatively short
✔✔Activity charts help analyze: - ✔✔utilization of an operator and machine
✔✔A disadvantage of work sampling is that: - ✔✔it tends to be less accurate,
particularly when task times are short.
✔✔A manufacturing plant allows its engineers to come in at 7 A.M. plus or minus an
hour but still requires them to work 8-hour days. Which of the following scheduling
techniques is the firm employing? - ✔✔flextime
