WITH ACTUAL ANSWERS |GRADED A+ .
An acceptable method of package closure that is used as an external indicator - correct Answers -
indicator tapes
Must be inside every sterile package - correct Answers -chemical indicators (CI)
Flat-wrapping technique that applies one wrap on top of another to create a package within a package -
correct Answers -sequential
Government agency that regulates sterilization packaging materials - correct Answers -U.S. Food and
Drug Administration (FDA)
Type of pack that contains cellulosic materials and is used to package small items for low-temperature
sterilization - correct Answers -spunbond polyolefin-plastic combinations
Type of packaging that can be used in steam and ethylene oxide (EO) sterilization but is not
recommended for other types of sterilization - correct Answers -paper/ plastic combinations
When using paper/ plastic combination pouches, package content information should be written on this
side of the pouch - correct Answers -plastic
This is NOT an acceptable method of package closure - correct Answers -paper clips
Muslin is an example of this type of packaging material - correct Answers -reusable
The wrapping technique most commonly used for small packs and most trays - correct Answers -
envelope fold
1
, The U.S. Food and Drug Administration (FDA) classifies sterilization packaging as a:
A. Class I medical device
B. Class II medical device
C. Class III medical device
D. Class IV medical device - correct Answers -B. Class II medical device
Which of the following is NOT an acceptable sterilization packaging material?
A. Muslin
B. Barrier cloth
C. Canvas
D. Twill - correct Answers -C. Canvas
Count sheets:
A. Describe each instrument in detail
B. Are used only for Operating Room (OR) trays and large procedure packs
C. Provide a detailed list of tray contents
D. Include information from the manufacturer's instruction for use (IFU) - correct Answers -C. Provide a
detailed list of tray contents
When arranging paper/plastic pouches in a sterilizer, the pouches should be arranged:
A. Paper to plastic
B. Paper to paper
C. Plastic to plastic
D. Flat - correct Answers -A. Paper to plastic
How often should the insulation of electrosurgical instruments be tested for integrity?
A. Only when requested
B. Every time the instrument is processed
2