BNSF ROADWAY WORKER PROTECTION
CONTRACTOR SAFETY AND SECURITY
TRAINING ACTUAL TEST QUESTIONS AND
ACCURATE ANSWERS COMPLETE REVIEW
SHEET
●● What is the appearance of a fixed or cab signal ?
A. Signal indication
B. Signal aspect
C. Signal reasons
Answer: B. Signal aspect
●● According to rules hierarchy the system special instruction can be
updated by which of the following?
A. Service unit general order
B. General notice
C. System general order
Answer: C. System general order
●● What is an absolute signal that is controlled by a controlled operator?
,A. Track occupation signal
B. Stop and proceed signal
C. Controlled signal
Answer: C. Controlled signal
●● Your duties require you to cross through a train or a standing cut of
cars. After proper protection is provided and before crossing over from
one side of the equipment to the other side, you should?
A. Choose equipment carefully, using cars equipped with a crossover
platform and handholds (when available).
B. On equipment where crossover platforms and handholds are not
available, use end of car structural bracing to maintain 3-point contact, il
sate to do so.
C. Both answers are correct.
Answer: C. Both answers are correct
●● What is a system of tracks, other than main tracks and sidings, that is
used for making up trains, storng cars, and other purposes?
A. Siding
,B. Main track
C. Yard
Answer: C. Yard
●● To enter an area between two adjacent tracks is the glossary
definition of ?
A. Breach
B. Crossing Through
C. Red Zone
Answer: A. Breach
●● Employees must not get on or off cars and engines (whether standing
or moving) except when required in the performance of duty, and only
when it can be done safely. When getting off standing equipment:
A.Let go with both hands before your feet touch the ground or other
support.
, B.Retain a grip with both hands on the handhold until both feet are
firmly placed on the ground or other support.
C. Place one foot on the ground, then let go with one hand and place the
other foot on the ground before letting go.
Answer: B.Retain a grip with both hands on the handhold until both feet
are firmly placed on the ground or other support.
●● Employees must be careful to prevent injuring themselves or others.
They must be _________ when performing their dutics and plan their
work to avoid injury.
A. Alert and Attentive
B. Responsive and Activel
C. Organized and Permissive
Answer: A. Alert and attentive
●● When an engine, train or cars are left unattended, what must you do
to secure them?.
A. Apply air brakes to hold the train in place.
B. Make a full-service reduction and place the train in emergency.
C. Apply a suflicient number of hand brakes to prevent movement.
CONTRACTOR SAFETY AND SECURITY
TRAINING ACTUAL TEST QUESTIONS AND
ACCURATE ANSWERS COMPLETE REVIEW
SHEET
●● What is the appearance of a fixed or cab signal ?
A. Signal indication
B. Signal aspect
C. Signal reasons
Answer: B. Signal aspect
●● According to rules hierarchy the system special instruction can be
updated by which of the following?
A. Service unit general order
B. General notice
C. System general order
Answer: C. System general order
●● What is an absolute signal that is controlled by a controlled operator?
,A. Track occupation signal
B. Stop and proceed signal
C. Controlled signal
Answer: C. Controlled signal
●● Your duties require you to cross through a train or a standing cut of
cars. After proper protection is provided and before crossing over from
one side of the equipment to the other side, you should?
A. Choose equipment carefully, using cars equipped with a crossover
platform and handholds (when available).
B. On equipment where crossover platforms and handholds are not
available, use end of car structural bracing to maintain 3-point contact, il
sate to do so.
C. Both answers are correct.
Answer: C. Both answers are correct
●● What is a system of tracks, other than main tracks and sidings, that is
used for making up trains, storng cars, and other purposes?
A. Siding
,B. Main track
C. Yard
Answer: C. Yard
●● To enter an area between two adjacent tracks is the glossary
definition of ?
A. Breach
B. Crossing Through
C. Red Zone
Answer: A. Breach
●● Employees must not get on or off cars and engines (whether standing
or moving) except when required in the performance of duty, and only
when it can be done safely. When getting off standing equipment:
A.Let go with both hands before your feet touch the ground or other
support.
, B.Retain a grip with both hands on the handhold until both feet are
firmly placed on the ground or other support.
C. Place one foot on the ground, then let go with one hand and place the
other foot on the ground before letting go.
Answer: B.Retain a grip with both hands on the handhold until both feet
are firmly placed on the ground or other support.
●● Employees must be careful to prevent injuring themselves or others.
They must be _________ when performing their dutics and plan their
work to avoid injury.
A. Alert and Attentive
B. Responsive and Activel
C. Organized and Permissive
Answer: A. Alert and attentive
●● When an engine, train or cars are left unattended, what must you do
to secure them?.
A. Apply air brakes to hold the train in place.
B. Make a full-service reduction and place the train in emergency.
C. Apply a suflicient number of hand brakes to prevent movement.
