ICC MASONRY EXAM (ACTUAL EXAM) WITH
CORRECT ACTUAL QUESTIONS AND
CORRECTLY WELL DEFINED ANSWERS LATEST
ALREADY GRADED A+ 2026
Save
Practice questions for this set
Learn 1 /7 Study with Learn
ASTM C 1019; ASTM - C1019-03
Choose an answer
Which of the following is the standard specification for loadbearing
1
concrete masonry units?
After initial mixing, when the ambient temperature exceeds 90
2 degrees F with a wind velocity over 8 mph, mortar used in masonry
construction must be discarded after
3 The slump test for grout must be performed in accordance with
4 In what condition are grout specimens to be tested?
, Don't know?
Terms in this set (81)
Which of the following is the ASTM C 90; RCMCI 6th Edition, Section 2.2.1
standard specification for
loadbearing
concrete masonry units?
Which of the following grout Super plasticizer; RCMCI 6th Edition, Section
admixtures is used to obtain a high 2.11.6
slump with reduced water?
Which of the following is the ASTM C 1386; CI 530; Part 2, Section 2.3E. IBC
standard specification that 2103.3
autoclaved aerated concrete
masonry units must conform to for
the strength class specified in the
contract documents?
Grout intended for use in the ASTM C 476; 2006 IBC 2103.12
construction of engineered and
empirically designed masonry
structures must comply with
CORRECT ACTUAL QUESTIONS AND
CORRECTLY WELL DEFINED ANSWERS LATEST
ALREADY GRADED A+ 2026
Save
Practice questions for this set
Learn 1 /7 Study with Learn
ASTM C 1019; ASTM - C1019-03
Choose an answer
Which of the following is the standard specification for loadbearing
1
concrete masonry units?
After initial mixing, when the ambient temperature exceeds 90
2 degrees F with a wind velocity over 8 mph, mortar used in masonry
construction must be discarded after
3 The slump test for grout must be performed in accordance with
4 In what condition are grout specimens to be tested?
, Don't know?
Terms in this set (81)
Which of the following is the ASTM C 90; RCMCI 6th Edition, Section 2.2.1
standard specification for
loadbearing
concrete masonry units?
Which of the following grout Super plasticizer; RCMCI 6th Edition, Section
admixtures is used to obtain a high 2.11.6
slump with reduced water?
Which of the following is the ASTM C 1386; CI 530; Part 2, Section 2.3E. IBC
standard specification that 2103.3
autoclaved aerated concrete
masonry units must conform to for
the strength class specified in the
contract documents?
Grout intended for use in the ASTM C 476; 2006 IBC 2103.12
construction of engineered and
empirically designed masonry
structures must comply with