Engines require a lot of air with minimum restriction so when choosing a intake air
ducting system, the ducting should be atleast:
Give this one a try later!
as large as the air cleaner inlet size, and have long, radius elbows.
Engine start-up procedures should be followed only for new engines or engines that
have been moved to a new location.
True or False.
Give this one a try later!
, False; whether an engine is being started for the first time or if the engine
has been running recently, proper engine start-up procedures should
always be carried out by qualified personnel to ensure safe start up.
The foundation a engine or piece of equipment is called what?
Give this one a try later!
inertia block
When preparing to lift an engine/engine components, the information from the
manufacturer should include the weight of the engine or the components. How does
this help you prepare for the lift?
(3)
Give this one a try later!
1. crane size
2. proper strength of slings
3. correct type of jacks
what must you take caution of when overhauling a rotary compressor?
Give this one a try later!
, The piston hollow may fill with the potentially toxic gases that it was
compressing, being released upon you when disassembling it. EVEN IF
YOU BLED THE SYSTEM!!
The engine installation affects how well the engine is fastened to the foundation, but
does not affect the engine life.
true or false
Give this one a try later!
False; if the engine foundation and mounting methods are not adequate,
several problems such as machine misalignment, machine and building
vibration and machine torsional stress can result.
What 3 methods are used to move the engine into position during installation?
Give this one a try later!
1. large cranes to lift the whole unit
2. rolling the engine into position
3. lifting the engine with hydraulic jacks and then setting it in place
An inertia block is an engine that has the block reinforced with heavy ribs or a heavy
skid filled with grout.
True or False
Give this one a try later!
ducting system, the ducting should be atleast:
Give this one a try later!
as large as the air cleaner inlet size, and have long, radius elbows.
Engine start-up procedures should be followed only for new engines or engines that
have been moved to a new location.
True or False.
Give this one a try later!
, False; whether an engine is being started for the first time or if the engine
has been running recently, proper engine start-up procedures should
always be carried out by qualified personnel to ensure safe start up.
The foundation a engine or piece of equipment is called what?
Give this one a try later!
inertia block
When preparing to lift an engine/engine components, the information from the
manufacturer should include the weight of the engine or the components. How does
this help you prepare for the lift?
(3)
Give this one a try later!
1. crane size
2. proper strength of slings
3. correct type of jacks
what must you take caution of when overhauling a rotary compressor?
Give this one a try later!
, The piston hollow may fill with the potentially toxic gases that it was
compressing, being released upon you when disassembling it. EVEN IF
YOU BLED THE SYSTEM!!
The engine installation affects how well the engine is fastened to the foundation, but
does not affect the engine life.
true or false
Give this one a try later!
False; if the engine foundation and mounting methods are not adequate,
several problems such as machine misalignment, machine and building
vibration and machine torsional stress can result.
What 3 methods are used to move the engine into position during installation?
Give this one a try later!
1. large cranes to lift the whole unit
2. rolling the engine into position
3. lifting the engine with hydraulic jacks and then setting it in place
An inertia block is an engine that has the block reinforced with heavy ribs or a heavy
skid filled with grout.
True or False
Give this one a try later!
