AMPP (NACE) Cathodic Protection Tester
CP1 Book Chapters 5-10 Practice Quiz
1. In complex structures, al- 2026
near, little to no
ways select materials that
are each other in the gal-
vanic series that will exhibit
voltage differences
2. What is the first line of de- coating
fense in corrosion control
programs?
3. If the structure is coated, it is holidays
necessary to protect only the
metal exposed at
4. Pipeline coatings designed UV, sunlight
for underground use do not
have good resistance to
light, so is to be avoided
5. Coatings formulated from bituminous enamels
coal tar pitch or natural as-
phalt, reinforced with glass
and a felt wrapper, used less
today because of toxicity
6. Coatings that consist of poly- extruded polyolefin and polyethylene
olefin or polyethylene ex-
truded over butyl or asphalt
mastic adhesive, high im-
pact resistance and resist
holiday development
7. tape coatings
, AMPP (NACE) Cathodic Protection Tester
CP1 Book Chapters 5-10 Practice Quiz
Coatings that consist of a 2026
primer, corrosion sealant in-
ner layer, mechanical protec-
tive outer layer backing (usu-
ally polyethylene or poly-
butylene), prone to disbond-
ing if not properly tensioned
8. Coatings that consist of pow- fusion boned epoxy (FBE)
dered resin electrostatically
sprayed onto heated pipe,
moisture absorption can be
a problem
9. Coatings that consist of liq- two-component liquid resin coatings (two part epoxy)
uid resin (epoxy) and a cur-
ing agent, resistant to im-
pact and abrasion damage
10. What is essential for the proper surface preparation and application (hot or cold)
coating to bond properly to
the metal?
11. What environmental condi- temperature, humidity, dew point
tions must be checked dur-
ing initial inspection before
coating application?
12. What should be checked for disbonding, damage, checking, cracking, chalking, etc. (check if
visually during coating appli- reconditioning is required)
cation?
13.
CP1 Book Chapters 5-10 Practice Quiz
1. In complex structures, al- 2026
near, little to no
ways select materials that
are each other in the gal-
vanic series that will exhibit
voltage differences
2. What is the first line of de- coating
fense in corrosion control
programs?
3. If the structure is coated, it is holidays
necessary to protect only the
metal exposed at
4. Pipeline coatings designed UV, sunlight
for underground use do not
have good resistance to
light, so is to be avoided
5. Coatings formulated from bituminous enamels
coal tar pitch or natural as-
phalt, reinforced with glass
and a felt wrapper, used less
today because of toxicity
6. Coatings that consist of poly- extruded polyolefin and polyethylene
olefin or polyethylene ex-
truded over butyl or asphalt
mastic adhesive, high im-
pact resistance and resist
holiday development
7. tape coatings
, AMPP (NACE) Cathodic Protection Tester
CP1 Book Chapters 5-10 Practice Quiz
Coatings that consist of a 2026
primer, corrosion sealant in-
ner layer, mechanical protec-
tive outer layer backing (usu-
ally polyethylene or poly-
butylene), prone to disbond-
ing if not properly tensioned
8. Coatings that consist of pow- fusion boned epoxy (FBE)
dered resin electrostatically
sprayed onto heated pipe,
moisture absorption can be
a problem
9. Coatings that consist of liq- two-component liquid resin coatings (two part epoxy)
uid resin (epoxy) and a cur-
ing agent, resistant to im-
pact and abrasion damage
10. What is essential for the proper surface preparation and application (hot or cold)
coating to bond properly to
the metal?
11. What environmental condi- temperature, humidity, dew point
tions must be checked dur-
ing initial inspection before
coating application?
12. What should be checked for disbonding, damage, checking, cracking, chalking, etc. (check if
visually during coating appli- reconditioning is required)
cation?
13.
