NCCER Core Exam | Verified Exam Questions and Answers | Latest
Updated Study Material 2026
Question:
Adjustable Wrench
Answer:
A smooth-jawed wrench with an adjustable
jaw used for turning nuts and bolts. Often referred to as a Crescent wrench due to brand
recognition
Question:
Ball-Peen Hammer
Answer:
A hammer with a flat face that is used to
strike cold chisels and punches. The rounded end -the peen- is used to bend and shape soft metal.
Question:
Bell-faced hammer
Answer:
A claw hammer with a slightly rounded, or
convex, face.
Question:
Bevel
Answer:
To cut on a slant at an angle that is not a right angle (90
degrees). The angle or inclination of a line or surface that meets another at any angle but 90
degrees.
Question:
Box-end wrench
Answer:
A wrench, usually double-ended, that has a
closed socket that fits over the head of a bolt
, Question:
Carpenter's Square
Answer:
A flat, steel square commonly used in
carpentry
Question:
Cat's paw
Answer:
A straight steel rod with a curved claw at one end that
is used to pull nails that have been driven flush with the surface of the wood or slightly below it.
Question:
Chisel
Answer:
A metal tool with a sharpened, beveled edge used to cut
and shape wood, stone, or metal.
Question:
Chisel Bar
Answer:
A tool with a claw at each end, commonly used to
pull nails.
Question:
Claw Hammer
Answer:
A hammer with a flat striking face. the other end
of the head is curved and divided into two claws to remove nails.
Question:
Combination square
Answer:
An adjustable carpenter's tool consisting of
a steel rule that slides through an adjustable head; it can be used to mark 45 and 90 degree
angles.
Updated Study Material 2026
Question:
Adjustable Wrench
Answer:
A smooth-jawed wrench with an adjustable
jaw used for turning nuts and bolts. Often referred to as a Crescent wrench due to brand
recognition
Question:
Ball-Peen Hammer
Answer:
A hammer with a flat face that is used to
strike cold chisels and punches. The rounded end -the peen- is used to bend and shape soft metal.
Question:
Bell-faced hammer
Answer:
A claw hammer with a slightly rounded, or
convex, face.
Question:
Bevel
Answer:
To cut on a slant at an angle that is not a right angle (90
degrees). The angle or inclination of a line or surface that meets another at any angle but 90
degrees.
Question:
Box-end wrench
Answer:
A wrench, usually double-ended, that has a
closed socket that fits over the head of a bolt
, Question:
Carpenter's Square
Answer:
A flat, steel square commonly used in
carpentry
Question:
Cat's paw
Answer:
A straight steel rod with a curved claw at one end that
is used to pull nails that have been driven flush with the surface of the wood or slightly below it.
Question:
Chisel
Answer:
A metal tool with a sharpened, beveled edge used to cut
and shape wood, stone, or metal.
Question:
Chisel Bar
Answer:
A tool with a claw at each end, commonly used to
pull nails.
Question:
Claw Hammer
Answer:
A hammer with a flat striking face. the other end
of the head is curved and divided into two claws to remove nails.
Question:
Combination square
Answer:
An adjustable carpenter's tool consisting of
a steel rule that slides through an adjustable head; it can be used to mark 45 and 90 degree
angles.
