7/15/26, 8:59 AM SNSP Exam - Best Practices and other Basics EXAM - 2026 (Questions + Answers) with verified Answers (Latest Update 2026) UP…
SNSP Exam - Best Practices and other Basics
EXAM - 2026 (Questions + Answers) with verified
Answers (Latest Update 2026) UPDATE!!
Compliance Tips & How to Pass Fast
Save Add to calendar
Terms in this set (85)
Which interfaces cannot be X0 and MGMT
configured as WAN interfaces
What is the default configuration of Static mode with IP of 0.0.0.0
X1
To avoid routing issues of X1 what It's assigned with a valid non-zero IP address or
should you ensure configuring for DHCP or PPPoE
True or False: It is recommended to True - Unassigned
disassociate the from the WAN zone
if not in use
True or False: You should open False
HTTPS Mgmt up on the WAN
interface
True or False: Check the "Add rule to False
enable redirect from HTTP to HTTPS"
option when configuring HTTPM
management
https://quizlet.com/1194809551/snsp-exam-best-practices-and-other-basics-exam-2026-questions-answers-with-verified-answers-latest-update-2026-… 1/11
, 7/15/26, 8:59 AM SNSP Exam - Best Practices and other Basics EXAM - 2026 (Questions + Answers) with verified Answers (Latest Update 2026) UP…
What can result from incorrect Inconsistent Internet connection, slow throughput,
duplex settings on the WAN dropped packets, and inability to negotiate to an
ISP connection
What settings are default on the Link Speed to Auto Negotiate
advanced tab of a WAN interface User Default MAC address
Enable Flow Reporting
Fragment non-VPN outbound packets larger than
this Interfaces MTU
MTU stands for what Maximum Transmission Unit
On DSL and cable connections is the Lower
MTU size generally lower or higher
How do you change the value of In increments of 8 bytes
MTU
True or False: Confirm that Ignore True
Don't Fragment DF bit is unchecked
True or False: Even if you only have 1 True
WAN connection you should still
enable "Enable Load Balancing"
Why must you enable load balancing To access the LB Groups and LB Statistics sections
with only 1 WAN connection of Failover and Load Balancing configuration
Which Probe menu should you Probe Succeeds when either main or alternate
select when configuring WAN target responds
probes
https://quizlet.com/1194809551/snsp-exam-best-practices-and-other-basics-exam-2026-questions-answers-with-verified-answers-latest-update-2026-… 2/11
SNSP Exam - Best Practices and other Basics
EXAM - 2026 (Questions + Answers) with verified
Answers (Latest Update 2026) UPDATE!!
Compliance Tips & How to Pass Fast
Save Add to calendar
Terms in this set (85)
Which interfaces cannot be X0 and MGMT
configured as WAN interfaces
What is the default configuration of Static mode with IP of 0.0.0.0
X1
To avoid routing issues of X1 what It's assigned with a valid non-zero IP address or
should you ensure configuring for DHCP or PPPoE
True or False: It is recommended to True - Unassigned
disassociate the from the WAN zone
if not in use
True or False: You should open False
HTTPS Mgmt up on the WAN
interface
True or False: Check the "Add rule to False
enable redirect from HTTP to HTTPS"
option when configuring HTTPM
management
https://quizlet.com/1194809551/snsp-exam-best-practices-and-other-basics-exam-2026-questions-answers-with-verified-answers-latest-update-2026-… 1/11
, 7/15/26, 8:59 AM SNSP Exam - Best Practices and other Basics EXAM - 2026 (Questions + Answers) with verified Answers (Latest Update 2026) UP…
What can result from incorrect Inconsistent Internet connection, slow throughput,
duplex settings on the WAN dropped packets, and inability to negotiate to an
ISP connection
What settings are default on the Link Speed to Auto Negotiate
advanced tab of a WAN interface User Default MAC address
Enable Flow Reporting
Fragment non-VPN outbound packets larger than
this Interfaces MTU
MTU stands for what Maximum Transmission Unit
On DSL and cable connections is the Lower
MTU size generally lower or higher
How do you change the value of In increments of 8 bytes
MTU
True or False: Confirm that Ignore True
Don't Fragment DF bit is unchecked
True or False: Even if you only have 1 True
WAN connection you should still
enable "Enable Load Balancing"
Why must you enable load balancing To access the LB Groups and LB Statistics sections
with only 1 WAN connection of Failover and Load Balancing configuration
Which Probe menu should you Probe Succeeds when either main or alternate
select when configuring WAN target responds
probes
https://quizlet.com/1194809551/snsp-exam-best-practices-and-other-basics-exam-2026-questions-answers-with-verified-answers-latest-update-2026-… 2/11
