TCFP FIRE INSPECTOR EXAM | 200 PRACTICE
QUESTIONS & ANSWERS | LATEST UPDATE THIS
YEAR.PDF | 100% VERIFIED
This comprehensive document contains 200 practice questions for the Texas Commission
on Fire Protection (TCFP) Fire Inspector Certification Exam. The material aligns with NFPA
1031 standards and TCFP requirements. Each question includes the correct answer
in bold with an italic explanation.
SECTION 1: CODES, STANDARDS & LEGAL AUTHORITY (Questions 1–30)
1. Which NFPA standard establishes the minimum job performance requirements for
Fire Inspector I and II?
A) NFPA 1
B) NFPA 101
C) NFPA 1031
D) NFPA 1033
Answer: C
NFPA 1031 is the Standard for Professional Qualifications for Fire Inspector and Plan
Examiner. NFPA 1 is the Fire Code, NFPA 101 is the Life Safety Code, and NFPA 1033 is
for Fire Investigators .
2. In Texas, the state-adopted fire code is found in:
A) Texas Penal Code
B) Texas Administrative Code Title 37, Part 11, Chapter 101
,C) Texas Health & Safety Code
D) Texas Local Government Code
Answer: B
The Texas Administrative Code Title 37 adopts the IFC with Texas-specific amendments .
3. Under the IFC, the Authority Having Jurisdiction (AHJ) is defined as:
A) Only the state fire marshal
B) The fire chief of the local department
C) The organization, office, or individual responsible for enforcing the code
D) Any certified fire inspector
Answer: C
IFC Section 202 defines AHJ broadly. It can be local, state, or federal, and is not limited to
the fire chief .
4. A local municipality may adopt a fire code amendment that is:
A) Less restrictive than the state code
B) More restrictive than the state code
C) Identical to the state code only
D) Any of the above
Answer: B
State law prohibits less restrictive local codes. Local governments may exceed state
minimums per Texas Local Government Code §214.212 .
5. Which duty is NOT the responsibility of a Level I Inspector?
A) Handle citizen complaints
B) Perform plans reviews
,C) Interpret adopted codes
D) Determine occupancy loads for single-use buildings
Answer: B
Plans review is typically a Level II or higher function. Level I inspectors focus on field
inspections and basic code enforcement .
6. Most consensus standards for fire and life safety are developed by which
organizations? (Choose the exception)
A) ASTM International
B) NFPA
C) ANSI
D) UL
Answer: C
ANSI accredits standards developers but does not write standards itself. ASTM, NFPA, and
UL are standards-developing organizations .
7. A fire inspector discovers a life-threatening hazard during an inspection. What is
the appropriate action?
A) Issue a warning with a 30-day correction period
B) Order immediate evacuation and post the building as unsafe
C) Wait for a court order
D) Do nothing without a warrant
Answer: B
IFC Section 109 allows emergency orders when there is an imminent hazard. Life safety is
the highest priority .
, 8. A Certificate of Occupancy is typically issued by the:
A) Fire inspector
B) Building official
C) Property owner
D) Insurance company
Answer: B
The building official issues the Certificate of Occupancy after all code compliance is verified
(fire, structural, etc.). Fire inspectors may recommend, but do not issue .
9. NFPA 1 requires that fire hydrants be inspected and flowed at least:
A) Monthly
B) Annually
C) Every 3 years
D) Every 5 years
Answer: B
NFPA 1 Section 18.4.4 and NFPA 25 require annual flow testing of fire hydrants .
10. An inspector finds that a fire alarm system has no record of annual testing. The
appropriate action is:
A) Ignore if building looks safe
B) Issue a violation citing NFPA 72 maintenance requirements
C) Shut down the building immediately
D) Test it yourself on the spot
Answer: B
QUESTIONS & ANSWERS | LATEST UPDATE THIS
YEAR.PDF | 100% VERIFIED
This comprehensive document contains 200 practice questions for the Texas Commission
on Fire Protection (TCFP) Fire Inspector Certification Exam. The material aligns with NFPA
1031 standards and TCFP requirements. Each question includes the correct answer
in bold with an italic explanation.
SECTION 1: CODES, STANDARDS & LEGAL AUTHORITY (Questions 1–30)
1. Which NFPA standard establishes the minimum job performance requirements for
Fire Inspector I and II?
A) NFPA 1
B) NFPA 101
C) NFPA 1031
D) NFPA 1033
Answer: C
NFPA 1031 is the Standard for Professional Qualifications for Fire Inspector and Plan
Examiner. NFPA 1 is the Fire Code, NFPA 101 is the Life Safety Code, and NFPA 1033 is
for Fire Investigators .
2. In Texas, the state-adopted fire code is found in:
A) Texas Penal Code
B) Texas Administrative Code Title 37, Part 11, Chapter 101
,C) Texas Health & Safety Code
D) Texas Local Government Code
Answer: B
The Texas Administrative Code Title 37 adopts the IFC with Texas-specific amendments .
3. Under the IFC, the Authority Having Jurisdiction (AHJ) is defined as:
A) Only the state fire marshal
B) The fire chief of the local department
C) The organization, office, or individual responsible for enforcing the code
D) Any certified fire inspector
Answer: C
IFC Section 202 defines AHJ broadly. It can be local, state, or federal, and is not limited to
the fire chief .
4. A local municipality may adopt a fire code amendment that is:
A) Less restrictive than the state code
B) More restrictive than the state code
C) Identical to the state code only
D) Any of the above
Answer: B
State law prohibits less restrictive local codes. Local governments may exceed state
minimums per Texas Local Government Code §214.212 .
5. Which duty is NOT the responsibility of a Level I Inspector?
A) Handle citizen complaints
B) Perform plans reviews
,C) Interpret adopted codes
D) Determine occupancy loads for single-use buildings
Answer: B
Plans review is typically a Level II or higher function. Level I inspectors focus on field
inspections and basic code enforcement .
6. Most consensus standards for fire and life safety are developed by which
organizations? (Choose the exception)
A) ASTM International
B) NFPA
C) ANSI
D) UL
Answer: C
ANSI accredits standards developers but does not write standards itself. ASTM, NFPA, and
UL are standards-developing organizations .
7. A fire inspector discovers a life-threatening hazard during an inspection. What is
the appropriate action?
A) Issue a warning with a 30-day correction period
B) Order immediate evacuation and post the building as unsafe
C) Wait for a court order
D) Do nothing without a warrant
Answer: B
IFC Section 109 allows emergency orders when there is an imminent hazard. Life safety is
the highest priority .
, 8. A Certificate of Occupancy is typically issued by the:
A) Fire inspector
B) Building official
C) Property owner
D) Insurance company
Answer: B
The building official issues the Certificate of Occupancy after all code compliance is verified
(fire, structural, etc.). Fire inspectors may recommend, but do not issue .
9. NFPA 1 requires that fire hydrants be inspected and flowed at least:
A) Monthly
B) Annually
C) Every 3 years
D) Every 5 years
Answer: B
NFPA 1 Section 18.4.4 and NFPA 25 require annual flow testing of fire hydrants .
10. An inspector finds that a fire alarm system has no record of annual testing. The
appropriate action is:
A) Ignore if building looks safe
B) Issue a violation citing NFPA 72 maintenance requirements
C) Shut down the building immediately
D) Test it yourself on the spot
Answer: B
