Manual Transmission/Transaxle Principles Final
Exam-Attempt 1 QUESTIONS WITH CORRECT
ANSWERS.
All gear ratios are calculated by the formula: - CORRECT ANSWER✅✅All gear ratios
are calculated by the formula of the driven gear divided by the drive gear.
All of the following are used by auto manufacturers when selecting the final drive gear
ratio, EXCEPT - CORRECT ANSWER✅✅the suspension's standing height.
All of the following is affected by the gear ratio of the final drive assembly EXCEPT: -
CORRECT ANSWER✅✅transmission shift patterns
As transmission gear ratios are changed, output torque and output speed also change.
If output speed is increased, output torque: - CORRECT ANSWER✅✅is decreased.
Drive axles used with front-wheel drive transaxles are called: - CORRECT
ANSWER✅✅Drive axles used with front-wheel drive transaxles are called half shafts.
Every component in a manual transmission drivetrain requires lubrication according to
the manufacturer's specifications: - CORRECT ANSWER✅✅Even after the warranty
has expired.
How does the lubricant helps to cool a transmission's internal components? -
CORRECT ANSWER✅✅It provides a thin film on the moving parts to reduce metal-to-
metal contact.
Referring to transfer cases, all of the following statements are true, EXCEPT: -
CORRECT ANSWER✅✅Power is always directed to both front and rear axles
Technician A says a manual transmission must always be lubricated with the exact gear
oil or fluid specified by the manufacturer. Technician B says other fluids or gear oils may
be used once the vehicle is out of warranty. Who is correct? - CORRECT
ANSWER✅✅Technician A
Technician A says solid drive axles MAY be used with independent suspension
systems. Technician B says half-shaft drive axles MUST be used with independent
suspension systems. Who is correct? - CORRECT ANSWER✅✅the first type is the
independent suspension drive axle. It uses one half-shaft axle for each of the two
Exam-Attempt 1 QUESTIONS WITH CORRECT
ANSWERS.
All gear ratios are calculated by the formula: - CORRECT ANSWER✅✅All gear ratios
are calculated by the formula of the driven gear divided by the drive gear.
All of the following are used by auto manufacturers when selecting the final drive gear
ratio, EXCEPT - CORRECT ANSWER✅✅the suspension's standing height.
All of the following is affected by the gear ratio of the final drive assembly EXCEPT: -
CORRECT ANSWER✅✅transmission shift patterns
As transmission gear ratios are changed, output torque and output speed also change.
If output speed is increased, output torque: - CORRECT ANSWER✅✅is decreased.
Drive axles used with front-wheel drive transaxles are called: - CORRECT
ANSWER✅✅Drive axles used with front-wheel drive transaxles are called half shafts.
Every component in a manual transmission drivetrain requires lubrication according to
the manufacturer's specifications: - CORRECT ANSWER✅✅Even after the warranty
has expired.
How does the lubricant helps to cool a transmission's internal components? -
CORRECT ANSWER✅✅It provides a thin film on the moving parts to reduce metal-to-
metal contact.
Referring to transfer cases, all of the following statements are true, EXCEPT: -
CORRECT ANSWER✅✅Power is always directed to both front and rear axles
Technician A says a manual transmission must always be lubricated with the exact gear
oil or fluid specified by the manufacturer. Technician B says other fluids or gear oils may
be used once the vehicle is out of warranty. Who is correct? - CORRECT
ANSWER✅✅Technician A
Technician A says solid drive axles MAY be used with independent suspension
systems. Technician B says half-shaft drive axles MUST be used with independent
suspension systems. Who is correct? - CORRECT ANSWER✅✅the first type is the
independent suspension drive axle. It uses one half-shaft axle for each of the two
