Asbestos Contractor/Supervisor Exam
Questions And Correct Answers
Fibers
Asbestos is a generic name for a group of minerals that form __________
Hood, booties, coveralls
The following are parts of a protective clothing ensemble
Removal of 5 feet of pipe insulation in order to fix a leak in the pipe
Which of the following operations would be considered to be an OSHA Class II
job?
Holes cut in the polyethylene next to the machines
Make-up air for a negative pressure enclosure usually comes from
Sealed, labeled containers or wraps
All asbestos waste must be
,Inhalation
Asbestos enters the body via
Guard rails
Free standing mobile scaffolding that is 16 feet high are required to have
LOCKABLE WHEELS, NOT TO BE LESS THAN 4 FEET WIDE, BE INSPECTED BY A
COMPETENT PERSON, and must have what?
The removal of all specified asbestos-containing materials
A final visual inspection is used to determine which one of the final steps of an
abatement project?
50-90 times
How much greater is the incidence of lung cancer in asbestos workers who
smoke than in non-asbestos workers who do not smoke?
Personal air monitoring
Which of the following records must be kept for a minimum of 30 years?
, Any job where the amount of friable ACM being removed is less than 260 linear
feet or 160 square feet
AHERA regulations allow PCM to be used as a method of analysis for:
Visible emissions
When removing asbestos-containing materials, which of the following is most
difficult to control?
OSHA
What federal agency regulates asbestos in the manufacturing sector through
29CFR 1910.1001 and in the construction industry through 29 CFR 1926.1101?
2 layers of 4 mil on the walls and 2 layers of 6 mil on the floors
When constructing a negative pressure containment for abatement, common
practice is to place polyethylene sheeting on the walls and floors consisting of
HEPA vacuuming protective clothing before leaving the work area
The following personal hygiene practice could reduce the chances of asbestos
exposure
Questions And Correct Answers
Fibers
Asbestos is a generic name for a group of minerals that form __________
Hood, booties, coveralls
The following are parts of a protective clothing ensemble
Removal of 5 feet of pipe insulation in order to fix a leak in the pipe
Which of the following operations would be considered to be an OSHA Class II
job?
Holes cut in the polyethylene next to the machines
Make-up air for a negative pressure enclosure usually comes from
Sealed, labeled containers or wraps
All asbestos waste must be
,Inhalation
Asbestos enters the body via
Guard rails
Free standing mobile scaffolding that is 16 feet high are required to have
LOCKABLE WHEELS, NOT TO BE LESS THAN 4 FEET WIDE, BE INSPECTED BY A
COMPETENT PERSON, and must have what?
The removal of all specified asbestos-containing materials
A final visual inspection is used to determine which one of the final steps of an
abatement project?
50-90 times
How much greater is the incidence of lung cancer in asbestos workers who
smoke than in non-asbestos workers who do not smoke?
Personal air monitoring
Which of the following records must be kept for a minimum of 30 years?
, Any job where the amount of friable ACM being removed is less than 260 linear
feet or 160 square feet
AHERA regulations allow PCM to be used as a method of analysis for:
Visible emissions
When removing asbestos-containing materials, which of the following is most
difficult to control?
OSHA
What federal agency regulates asbestos in the manufacturing sector through
29CFR 1910.1001 and in the construction industry through 29 CFR 1926.1101?
2 layers of 4 mil on the walls and 2 layers of 6 mil on the floors
When constructing a negative pressure containment for abatement, common
practice is to place polyethylene sheeting on the walls and floors consisting of
HEPA vacuuming protective clothing before leaving the work area
The following personal hygiene practice could reduce the chances of asbestos
exposure
