MEDIUM VOLTAGE
TERMINATIONS/SPLICES EXAM
QUESTIONS AND ANSWERS 2026
Four - ANSWERSTo finish a splice and ensure complete protection, it should be
covered with how many layers of vinyl electrical tape?
PVC - ANSWERSMaterials typically used for cable jackets include neoprene, lead,
and?
Class 1 - ANSWERSOnly class that provides a seal against external elements?
Protecting the insulation from the elements - ANSWERSInsulation shielding does not
perform this function.
Go/ no = go test - ANSWERSQuick test that can be made to determine if an installation
is good.
Nylon - ANSWERSMaterial not likely to be used for a cable jacket
Crimp type - ANSWERSSuitable connector for medium voltage cable splices is a
compression or?
Semi-Conductive layer under a metallic layer - ANSWERSOuter shielding in a medium
Voltage cable is described as?
An insulator - ANSWERSBest describes a medium voltage termination
80% - ANSWERSAcceptance testing calls for a maximum value of what percentage of
the factory test voltage?
Hi-pot test - ANSWERSWhen conducted properly, what will indicate faults, such as
cracks, discontinuity, thin spots, and faulty terminations?
Capacitive - ANSWERSTwo methods used to provide stress control for medium voltage
cable terminations are geometric and?
97% - ANSWERSCompressed stranding is compressed to what percentage of the
concentric conductor diameters?
60% - ANSWERSProof Test are made at what percentage of the original factory
voltage?
TERMINATIONS/SPLICES EXAM
QUESTIONS AND ANSWERS 2026
Four - ANSWERSTo finish a splice and ensure complete protection, it should be
covered with how many layers of vinyl electrical tape?
PVC - ANSWERSMaterials typically used for cable jackets include neoprene, lead,
and?
Class 1 - ANSWERSOnly class that provides a seal against external elements?
Protecting the insulation from the elements - ANSWERSInsulation shielding does not
perform this function.
Go/ no = go test - ANSWERSQuick test that can be made to determine if an installation
is good.
Nylon - ANSWERSMaterial not likely to be used for a cable jacket
Crimp type - ANSWERSSuitable connector for medium voltage cable splices is a
compression or?
Semi-Conductive layer under a metallic layer - ANSWERSOuter shielding in a medium
Voltage cable is described as?
An insulator - ANSWERSBest describes a medium voltage termination
80% - ANSWERSAcceptance testing calls for a maximum value of what percentage of
the factory test voltage?
Hi-pot test - ANSWERSWhen conducted properly, what will indicate faults, such as
cracks, discontinuity, thin spots, and faulty terminations?
Capacitive - ANSWERSTwo methods used to provide stress control for medium voltage
cable terminations are geometric and?
97% - ANSWERSCompressed stranding is compressed to what percentage of the
concentric conductor diameters?
60% - ANSWERSProof Test are made at what percentage of the original factory
voltage?
