EPA Lead Inspector Test Latest Exam|Questions and Verified
Answers | 100% Correct | Grade A+
What shell bonds to the nucleus the greatest? - Answer K
shell
The NIST Standard of reference material that is closest to 1.0
mg/cm2 is? - Answer Yellow
In a 4 hour inspection, how often must you perform
calibration check(s) of your XRF analyzer? - Answer Once
mg/cm2 is the scientific symbol for: - Answer milligram per
sqaured centimeter
Lead has been used for: - Answer All of the above
In a 10 hour inspection, a lead paint inspector must perform a
minimum of __ calibration checks - Answer 4
,For buildings that have been built prior to 1960 with 1040 or
more similar units, the inspector must test what percentage of
the units common areas and exterior sites? - Answer 5.7
(chart)
During the Roman Empire, lead production was estimated at
___ tons per year - Answer 80,000 tons
For buildings that have been built prior to 1960-1977 with
1000 or more similar units the inspector must test what
percent of the units common areas and exterior sites? -
Answer 2.9
Which of the following does HUD not consider a recognized
substrate? - Answer Paper
The chemical symbol for lead is - Answer Pb
As a qualified and trained lead inspector, you should be very
suspect of housing units built before due to the fact that the
, very well may contain some lead-based paint - Answer
1978
The major source of lead for most adults is: - Answer
occupational exposure
Lead causes permanent damage to: - Answer All of the
above
Which of the following is THE MAIN hazard for children's lead
poisoning: - Answer exposure through dust and soil
What is the source of radiation in all XRF Analyzers used to
test lead based paint? - Answer Cobalt-57 AND Cadmium-
109
Due to discrepancies of regulations, many inspectors
encounter difference between federal, state, or local,
standards. The "rule of thumb" is to: - Answer comply with
more stringent standards
Answers | 100% Correct | Grade A+
What shell bonds to the nucleus the greatest? - Answer K
shell
The NIST Standard of reference material that is closest to 1.0
mg/cm2 is? - Answer Yellow
In a 4 hour inspection, how often must you perform
calibration check(s) of your XRF analyzer? - Answer Once
mg/cm2 is the scientific symbol for: - Answer milligram per
sqaured centimeter
Lead has been used for: - Answer All of the above
In a 10 hour inspection, a lead paint inspector must perform a
minimum of __ calibration checks - Answer 4
,For buildings that have been built prior to 1960 with 1040 or
more similar units, the inspector must test what percentage of
the units common areas and exterior sites? - Answer 5.7
(chart)
During the Roman Empire, lead production was estimated at
___ tons per year - Answer 80,000 tons
For buildings that have been built prior to 1960-1977 with
1000 or more similar units the inspector must test what
percent of the units common areas and exterior sites? -
Answer 2.9
Which of the following does HUD not consider a recognized
substrate? - Answer Paper
The chemical symbol for lead is - Answer Pb
As a qualified and trained lead inspector, you should be very
suspect of housing units built before due to the fact that the
, very well may contain some lead-based paint - Answer
1978
The major source of lead for most adults is: - Answer
occupational exposure
Lead causes permanent damage to: - Answer All of the
above
Which of the following is THE MAIN hazard for children's lead
poisoning: - Answer exposure through dust and soil
What is the source of radiation in all XRF Analyzers used to
test lead based paint? - Answer Cobalt-57 AND Cadmium-
109
Due to discrepancies of regulations, many inspectors
encounter difference between federal, state, or local,
standards. The "rule of thumb" is to: - Answer comply with
more stringent standards
