MSSC Production Processes EXAM | Questions and Verified
Answers | 100% Correct | Grade A+
Sometimes the shipping and receiving areas can be at
opposite ends of the plant to be more efficient. Is this
statement TRUE or FALSE? - Answer True
The functional manufacturing areas in a company will vary
depending on its physical size and/or number of employees. Is
this statement TRUE or FALSE - Answer False
Production equipment downtime is __________ the company.
- Answer Very costly to
The human resources department is primarily responsible for
what? - Answer Attracting and retaining qualified
employees
,The QA department ensures that the products meet
requirements as defined by who? - Answer Customers
Which of the following is an area of the administration
personnel? - Answer Human Resources
Continuous flow layouts are used only when low volumes of
different parts must be produced. Is this statement TRUE or
FALSE? - Answer False
The selection of a production area layout depends on
__________. - Answer The type of product produced
Takt Time is set by customer demand to establish the time
between __________. - Answer Production of one product
to the next
A production line can run no faster than its __________ step. -
Answer Slowest
,Using the machine cycle times shown, where would you adjust
speeds of machines A, B, and C respectively to balance the
line? - Answer 5, 5, 5
Cast iron and steel are two examples of __________. - Answer
Ferrous metals
Up to 2% __________ is added to wrought iron to make steel. -
Answer Carbon
What materials are combined to make steel? - Answer Iron
and carbon
What characteristics are found in aluminum? - Answer
Strength, flexibility, weight, and weather resistance.
__________ is a reddish, malleable metal that conducts
electricity well and resists weathering. - Answer Copper
__________ metals are resistant to corrosion, lightweight, and
bendable. - Answer Non-ferrous
, Brass and bronze are examples of __________. - Answer
Alloys
Chromium is added to steel to form __________. - Answer
Stainless steel
Plastics typically consume __________ of petroleum produced
worldwide. - Answer 4%
Composites consist of two or more __________ that result in
improved mechanical properties over the individual
ingredients. - Answer Ingredients
Ceramics are said to be __________ materials, which means
they maintain their shape and strength when exposed to high
heat. - Answer Refractory
__________ ceramics consist of clay-based products, glass,
and cement. - Answer Traditional
Answers | 100% Correct | Grade A+
Sometimes the shipping and receiving areas can be at
opposite ends of the plant to be more efficient. Is this
statement TRUE or FALSE? - Answer True
The functional manufacturing areas in a company will vary
depending on its physical size and/or number of employees. Is
this statement TRUE or FALSE - Answer False
Production equipment downtime is __________ the company.
- Answer Very costly to
The human resources department is primarily responsible for
what? - Answer Attracting and retaining qualified
employees
,The QA department ensures that the products meet
requirements as defined by who? - Answer Customers
Which of the following is an area of the administration
personnel? - Answer Human Resources
Continuous flow layouts are used only when low volumes of
different parts must be produced. Is this statement TRUE or
FALSE? - Answer False
The selection of a production area layout depends on
__________. - Answer The type of product produced
Takt Time is set by customer demand to establish the time
between __________. - Answer Production of one product
to the next
A production line can run no faster than its __________ step. -
Answer Slowest
,Using the machine cycle times shown, where would you adjust
speeds of machines A, B, and C respectively to balance the
line? - Answer 5, 5, 5
Cast iron and steel are two examples of __________. - Answer
Ferrous metals
Up to 2% __________ is added to wrought iron to make steel. -
Answer Carbon
What materials are combined to make steel? - Answer Iron
and carbon
What characteristics are found in aluminum? - Answer
Strength, flexibility, weight, and weather resistance.
__________ is a reddish, malleable metal that conducts
electricity well and resists weathering. - Answer Copper
__________ metals are resistant to corrosion, lightweight, and
bendable. - Answer Non-ferrous
, Brass and bronze are examples of __________. - Answer
Alloys
Chromium is added to steel to form __________. - Answer
Stainless steel
Plastics typically consume __________ of petroleum produced
worldwide. - Answer 4%
Composites consist of two or more __________ that result in
improved mechanical properties over the individual
ingredients. - Answer Ingredients
Ceramics are said to be __________ materials, which means
they maintain their shape and strength when exposed to high
heat. - Answer Refractory
__________ ceramics consist of clay-based products, glass,
and cement. - Answer Traditional
