ICC Masonry
Comprehensive Resource To Help You Ace 2026-2027 Exams
Includes Frequently Tested Questions With ELABORATED
100% Correct COMPLETE SOLUTIONS
Guaranteed Pass First Attempt!! Current Update!!
1. Standards produced by who are referenced whenever possible? -
Correct Answer: ASTM International; 602 S9 1.3
2. Standards produced by who are referenced whenever possible? -
Correct Answer: ASTM International; 602 S9 1.3
3. Standard testing for sampling and testing brick and structural clay tile. -
Correct Answer: AI. ASTM C67; 602 S11 1.3
4. Standard specification for face brick ( solid masonry units made of clay or
shale) - Correct Answer: AS. ASTM C216; 602 S11 1.3
5. Standard specification for Marble Dimensions Stone - Correct Answer:
AS. ASTM C503; 602 S11 1.3
6. Thickness of Bed Joints do not exceed what? - Correct Answer: 5/8 in.;
602 S15 1.4 B.2.a.2
,7. Sir grout in masonry, the grout conforms to what? - Correct Answer:
Article 2.2; 602 S15 1.4 B.2.a.3
8. For how many square feet of wall must you saw cut a minimum of how
many prisons for a completed Masonry? - Correct Answer: 5000, three;
602 S21 1.4 B.4.a
9. What is the ideal temperature for Mortar? - Correct Answer: 60°F to
80°F; 602 S29 1.8 C commentary
10.A method of proportioning structural members, such that elastically
computed stresses produced in the members by nominal loads do not
exceed specified allowable stresses. Also called working stress design -
Correct Answer: Allowable stress design
IBC Definitions
11.Cell (masonry)
IBC Definitions - Correct Answer: A void space having a gross cross-
sectional area greater than one and a half square inches
12.Dead Load
IBC Definitions - Correct Answer: The weight of materials of Construction
Incorporated into the building, including but not limited to walls, floors, roofs,
ceilings, stairways, built-in partitions, finishes, cladding and other similarly
Incorporated architectural and structural items, and the weight of fixed
,Services equipment, such as cranes, Plumbing stacks and rivers, electrically
theaters, Heating, ventilating and air-conditioning systems and automatic
sprinkler system.
13.Designated Seismic System
IBC Definitions - Correct Answer: Those non structural components that
require design in accordance with chapter 13 of asce 7 and for which
component importance factor is greater than 1 in accordance with section
13.1.3 of asce 7.
14.Seismic design category
IBC Definitions - Correct Answer: Eight classification assigned to a structure
based on its risk category and the severity of the design earthquake ground
motion at the site.
15.Seismic force-resisting system
IBC Definitions - Correct Answer: That part of the structural system that has
been considered in the design to provide the required resistance to the
prescribed seismic forces.
16.Periodic special inspection
IBC Definitions - Correct Answer: Special inspection by the special inspector
who is intermittently present where the work to be inspected has been or is
being performed.
17.Strength design
, IBC Definitions - Correct Answer: A method of proportioning structural
members such that the computed forces produced in the members by factored
loads do not exceed the member design strength, also called load and
resistance Factor design. The term strength design is used in design of
Concrete & Masonry structural elements.
18.Structural observation
IBC Definitions - Correct Answer: The visual observation of the structural
system by registered design professional for General conformance to the
approved construction documents. Engineering and architecture.
19.Cleanouts
602 S5 Definitions - Correct Answer: Openings that are sized and space to
allow removal of debris at the bottom of the grout space.
20.Sufficient sized and spaced.
602 S5 Definitions - Correct Answer: What type of cleanouts are to
allow removal of debris from the bottom of the grout space.
21.ASTM International
602 S9 1.3 - Correct Answer: Standards produced by who are referenced
whenever possible?
22.AI. ASTM C67
602 S11 1.3 - Correct Answer: Standard testing for sampling and testing
brick and structural clay tile.
Comprehensive Resource To Help You Ace 2026-2027 Exams
Includes Frequently Tested Questions With ELABORATED
100% Correct COMPLETE SOLUTIONS
Guaranteed Pass First Attempt!! Current Update!!
1. Standards produced by who are referenced whenever possible? -
Correct Answer: ASTM International; 602 S9 1.3
2. Standards produced by who are referenced whenever possible? -
Correct Answer: ASTM International; 602 S9 1.3
3. Standard testing for sampling and testing brick and structural clay tile. -
Correct Answer: AI. ASTM C67; 602 S11 1.3
4. Standard specification for face brick ( solid masonry units made of clay or
shale) - Correct Answer: AS. ASTM C216; 602 S11 1.3
5. Standard specification for Marble Dimensions Stone - Correct Answer:
AS. ASTM C503; 602 S11 1.3
6. Thickness of Bed Joints do not exceed what? - Correct Answer: 5/8 in.;
602 S15 1.4 B.2.a.2
,7. Sir grout in masonry, the grout conforms to what? - Correct Answer:
Article 2.2; 602 S15 1.4 B.2.a.3
8. For how many square feet of wall must you saw cut a minimum of how
many prisons for a completed Masonry? - Correct Answer: 5000, three;
602 S21 1.4 B.4.a
9. What is the ideal temperature for Mortar? - Correct Answer: 60°F to
80°F; 602 S29 1.8 C commentary
10.A method of proportioning structural members, such that elastically
computed stresses produced in the members by nominal loads do not
exceed specified allowable stresses. Also called working stress design -
Correct Answer: Allowable stress design
IBC Definitions
11.Cell (masonry)
IBC Definitions - Correct Answer: A void space having a gross cross-
sectional area greater than one and a half square inches
12.Dead Load
IBC Definitions - Correct Answer: The weight of materials of Construction
Incorporated into the building, including but not limited to walls, floors, roofs,
ceilings, stairways, built-in partitions, finishes, cladding and other similarly
Incorporated architectural and structural items, and the weight of fixed
,Services equipment, such as cranes, Plumbing stacks and rivers, electrically
theaters, Heating, ventilating and air-conditioning systems and automatic
sprinkler system.
13.Designated Seismic System
IBC Definitions - Correct Answer: Those non structural components that
require design in accordance with chapter 13 of asce 7 and for which
component importance factor is greater than 1 in accordance with section
13.1.3 of asce 7.
14.Seismic design category
IBC Definitions - Correct Answer: Eight classification assigned to a structure
based on its risk category and the severity of the design earthquake ground
motion at the site.
15.Seismic force-resisting system
IBC Definitions - Correct Answer: That part of the structural system that has
been considered in the design to provide the required resistance to the
prescribed seismic forces.
16.Periodic special inspection
IBC Definitions - Correct Answer: Special inspection by the special inspector
who is intermittently present where the work to be inspected has been or is
being performed.
17.Strength design
, IBC Definitions - Correct Answer: A method of proportioning structural
members such that the computed forces produced in the members by factored
loads do not exceed the member design strength, also called load and
resistance Factor design. The term strength design is used in design of
Concrete & Masonry structural elements.
18.Structural observation
IBC Definitions - Correct Answer: The visual observation of the structural
system by registered design professional for General conformance to the
approved construction documents. Engineering and architecture.
19.Cleanouts
602 S5 Definitions - Correct Answer: Openings that are sized and space to
allow removal of debris at the bottom of the grout space.
20.Sufficient sized and spaced.
602 S5 Definitions - Correct Answer: What type of cleanouts are to
allow removal of debris from the bottom of the grout space.
21.ASTM International
602 S9 1.3 - Correct Answer: Standards produced by who are referenced
whenever possible?
22.AI. ASTM C67
602 S11 1.3 - Correct Answer: Standard testing for sampling and testing
brick and structural clay tile.
