AMMO 49 EXAMS SCRIPT ALL QUESTIONS AND
ANSWERS SURE A+
✔✔What is a pier/wharf safety observer? - ✔✔Qualified/Certified personnel responsible
for observing hazardous material handling to prevent rough or unsafe handling.
✔✔What is the maximum height allowable for vegetation surrounding a magazine? -
✔✔18 inches
✔✔Lightning protection system (LPS) inspections are guided by - ✔✔LPS test plans
✔✔Ground metal objects (e.g., air conditioning units, pipes, sprinklers, etc.) within ____
feet of an LPS conductor are often bonded to it. - ✔✔6 feet
✔✔What is the correct action to take if the chain of custody is compromised for
materials documented as safe (MDAS)? - ✔✔Material is designated MPPEH and go
through the MPPEH process again
✔✔Drivers operating government owned vehicles (GOV) must have a U.S. Government
Motor Vehicle Operator's License OF-346. - ✔✔True
✔✔Which is an example of a valid lock and key policy? - ✔✔
, ✔✔What is the acceptable timeframe for tagging/labeling an item after receiving an
URGENT NAR? - ✔✔1 business day
✔✔What are the A&E leadership responsibilities for supporting the QUAL/CERT
program? - ✔✔1.) Ensuring safety training addresses ES practices and principles
2.) Monitoring the activities QUAL/CERT programs for OPNAVIST 8020.14 compliance
3.) Assuring personnel involved with A&E operations receive required training
✔✔What requirements are needed for QUAL/CERT? Select all that apply. - ✔✔1.)
QUAL/CERT training plan
2. QUAL/CERT board
3.) Medical examinations
4.) Proficiency demonstrations
✔✔Certified personnel were moving ammo from a magazine to a training range. Before
they reached the range, there was a mishap. One person was injured. The investigation
determined that personnel had not followed safety. Procedures and were being
careless. What action should be taken on the personnel certification? - ✔✔Revocation
✔✔Are site/building diagrams always required as part of an SOP? - ✔✔No. Site/building
diagrams are optional in SOPs if a diagram approved by the process supervisor is
posted at the facility.
✔✔What is the required minimum distance between practice bomb
assembly/disassembly and parked aircraft when the NEW does not exceed 50 pounds?
- ✔✔50 feet
✔✔When conducting LPS testing, which publications should you have on hand? Select
all that apply. - ✔✔1.) NAVSEA OP 5, Vol. I
2.) LPS test plan
✔✔What are the 3 types of ranges? - ✔✔1.) Small Arms
2.) Test/Treatment
3.) Training/Operational
✔✔What safety components are present when range operations are being conducted?
Select all that apply. - ✔✔1.) Flag
2.)Signs
✔✔What off duty Shipment documents are required for the transportation of A&E? -
✔✔1.) Bill of Landing
2.) DD 626
3.) DD 2890
ANSWERS SURE A+
✔✔What is a pier/wharf safety observer? - ✔✔Qualified/Certified personnel responsible
for observing hazardous material handling to prevent rough or unsafe handling.
✔✔What is the maximum height allowable for vegetation surrounding a magazine? -
✔✔18 inches
✔✔Lightning protection system (LPS) inspections are guided by - ✔✔LPS test plans
✔✔Ground metal objects (e.g., air conditioning units, pipes, sprinklers, etc.) within ____
feet of an LPS conductor are often bonded to it. - ✔✔6 feet
✔✔What is the correct action to take if the chain of custody is compromised for
materials documented as safe (MDAS)? - ✔✔Material is designated MPPEH and go
through the MPPEH process again
✔✔Drivers operating government owned vehicles (GOV) must have a U.S. Government
Motor Vehicle Operator's License OF-346. - ✔✔True
✔✔Which is an example of a valid lock and key policy? - ✔✔
, ✔✔What is the acceptable timeframe for tagging/labeling an item after receiving an
URGENT NAR? - ✔✔1 business day
✔✔What are the A&E leadership responsibilities for supporting the QUAL/CERT
program? - ✔✔1.) Ensuring safety training addresses ES practices and principles
2.) Monitoring the activities QUAL/CERT programs for OPNAVIST 8020.14 compliance
3.) Assuring personnel involved with A&E operations receive required training
✔✔What requirements are needed for QUAL/CERT? Select all that apply. - ✔✔1.)
QUAL/CERT training plan
2. QUAL/CERT board
3.) Medical examinations
4.) Proficiency demonstrations
✔✔Certified personnel were moving ammo from a magazine to a training range. Before
they reached the range, there was a mishap. One person was injured. The investigation
determined that personnel had not followed safety. Procedures and were being
careless. What action should be taken on the personnel certification? - ✔✔Revocation
✔✔Are site/building diagrams always required as part of an SOP? - ✔✔No. Site/building
diagrams are optional in SOPs if a diagram approved by the process supervisor is
posted at the facility.
✔✔What is the required minimum distance between practice bomb
assembly/disassembly and parked aircraft when the NEW does not exceed 50 pounds?
- ✔✔50 feet
✔✔When conducting LPS testing, which publications should you have on hand? Select
all that apply. - ✔✔1.) NAVSEA OP 5, Vol. I
2.) LPS test plan
✔✔What are the 3 types of ranges? - ✔✔1.) Small Arms
2.) Test/Treatment
3.) Training/Operational
✔✔What safety components are present when range operations are being conducted?
Select all that apply. - ✔✔1.) Flag
2.)Signs
✔✔What off duty Shipment documents are required for the transportation of A&E? -
✔✔1.) Bill of Landing
2.) DD 626
3.) DD 2890
