TESTOUT EXAMS COMPILATION BUNDLE
VERIFIED COMPREHENSIVE SCRIPT 2026
COMPLETE QUESTIONS AND SOLUTIONS
GRADED A+
⩥ Which of the following is a valid IPv6? Answer: -FEC0::AB:9007
⩥ 1. Static Full Assignment
2. Static Partial Assignment
3. Stateless Autoconfiguration
4. Stateful DHCPv6
5. Stateless DHCPv6. Answer: Static Full Assignment ...
The entire 128-bit address and all other configuration information is
statically assigned to the host
Static Partial Assignment ...
The prefix is statically assigned and the interface ID is derived from the
MAC address
Stateless Autoconfiguration ...
,Clients automatically generate the interface ID and learn the subnet
prefix and default gateway through the Neighbor Discovery Protocol
(NDP)
Stateful DHCPv6 ...
Provides each client with an IP address, default gateway, and other IP
configuration information
Stateless DHCPv6 ...
Supplies the client with the DNS server IP address only. Does not
provide the client with an IP address and does not track the status of
each client
⩥ Which of the following tunneling methods is used to sent IPv4 traffic
through an IPv6 network?. Answer: -4-to-6 tunneling
⩥ You manage a network with two locations: Portland and Seattle. Both
locations are connected to the Internet. All computers in both locations
are configured to use IPv6. You would like to implement an IPv6
solution to meet the following requirements: -Hosts in each location
should be able to use IPv6 to communicate hosts in the other location
through the IPv4 Internet.
-You want to use a site-to-site tunneling method instead of a host-to-host
tunneling method. Which IPv6 solution should you use?. Answer: 6-to-4
,⩥ Which of the following are characteristics of Teredo tunneling? (3).
Answer: -Works through NAT
-Dual stack hosts
-Tunnel endpoints configured on hosts
⩥ You have a server at work with a custom application installed.
Connections to the server that use the custom application must use IPv6.
The server is currently running IPv4. You are the only person who
connects the server, and you always use your Linux laptop for the
connection. Your laptop supports both IPv4 and IPv6. The rest of your
company network runs only IPv4. You need a cost-effective solution to
allow your laptop to connect to the server. Your solution must also
support communication through NAT servers. Which client software
should you use to connect to the server?. Answer: -Miredo
⩥ You manage a network that uses IPv6 addressing. When clients
connect devices to the network, they generate an interface ID and use
NDP to learn the subnet prefix and default gateway. Which IPv6 address
assignment method is being used?. Answer: -Stateless autoconfiguration
⩥ Which type of address is used in a packet to address the packet to a
single host?. Answer: -Unicast
⩥ Which type of address is the IP address 198.162.12.254/24?. Answer:
-Unicast
, ⩥ Which of the following address types is shared by multiple hosts, and
is used to form groups of computers that should receive the same data
stream?. Answer: -Multicast
⩥ Which type of address is the IP address 232.111.255.250?. Answer: -
Multicast
⩥ Which protocol does an IP host use to inform a router that it wants to
receive specific multicast frames?. Answer: -IGMP
⩥ A video conference call consisting of multiple participants uses
____________ network transmissions?. Answer: -Multicast
⩥ You administer a network with Windows 2000 and UNIX servers, and
Windows 2000 Professional, Windows 98, and Macintosh clients. A user
of a Windows 98 computer calls you one day and says he is unable to
access resources on the network. You type ipconfig on the user's
computer and receive the following output:
0 Ethernet adapter:
IP address: 169.254.1.17
Subnet Mask: 255.255.0.0
Default Gateway :...
You also check your NIC and see the link light on. What might the
problem be?. Answer: -Unavailable DHCP server
VERIFIED COMPREHENSIVE SCRIPT 2026
COMPLETE QUESTIONS AND SOLUTIONS
GRADED A+
⩥ Which of the following is a valid IPv6? Answer: -FEC0::AB:9007
⩥ 1. Static Full Assignment
2. Static Partial Assignment
3. Stateless Autoconfiguration
4. Stateful DHCPv6
5. Stateless DHCPv6. Answer: Static Full Assignment ...
The entire 128-bit address and all other configuration information is
statically assigned to the host
Static Partial Assignment ...
The prefix is statically assigned and the interface ID is derived from the
MAC address
Stateless Autoconfiguration ...
,Clients automatically generate the interface ID and learn the subnet
prefix and default gateway through the Neighbor Discovery Protocol
(NDP)
Stateful DHCPv6 ...
Provides each client with an IP address, default gateway, and other IP
configuration information
Stateless DHCPv6 ...
Supplies the client with the DNS server IP address only. Does not
provide the client with an IP address and does not track the status of
each client
⩥ Which of the following tunneling methods is used to sent IPv4 traffic
through an IPv6 network?. Answer: -4-to-6 tunneling
⩥ You manage a network with two locations: Portland and Seattle. Both
locations are connected to the Internet. All computers in both locations
are configured to use IPv6. You would like to implement an IPv6
solution to meet the following requirements: -Hosts in each location
should be able to use IPv6 to communicate hosts in the other location
through the IPv4 Internet.
-You want to use a site-to-site tunneling method instead of a host-to-host
tunneling method. Which IPv6 solution should you use?. Answer: 6-to-4
,⩥ Which of the following are characteristics of Teredo tunneling? (3).
Answer: -Works through NAT
-Dual stack hosts
-Tunnel endpoints configured on hosts
⩥ You have a server at work with a custom application installed.
Connections to the server that use the custom application must use IPv6.
The server is currently running IPv4. You are the only person who
connects the server, and you always use your Linux laptop for the
connection. Your laptop supports both IPv4 and IPv6. The rest of your
company network runs only IPv4. You need a cost-effective solution to
allow your laptop to connect to the server. Your solution must also
support communication through NAT servers. Which client software
should you use to connect to the server?. Answer: -Miredo
⩥ You manage a network that uses IPv6 addressing. When clients
connect devices to the network, they generate an interface ID and use
NDP to learn the subnet prefix and default gateway. Which IPv6 address
assignment method is being used?. Answer: -Stateless autoconfiguration
⩥ Which type of address is used in a packet to address the packet to a
single host?. Answer: -Unicast
⩥ Which type of address is the IP address 198.162.12.254/24?. Answer:
-Unicast
, ⩥ Which of the following address types is shared by multiple hosts, and
is used to form groups of computers that should receive the same data
stream?. Answer: -Multicast
⩥ Which type of address is the IP address 232.111.255.250?. Answer: -
Multicast
⩥ Which protocol does an IP host use to inform a router that it wants to
receive specific multicast frames?. Answer: -IGMP
⩥ A video conference call consisting of multiple participants uses
____________ network transmissions?. Answer: -Multicast
⩥ You administer a network with Windows 2000 and UNIX servers, and
Windows 2000 Professional, Windows 98, and Macintosh clients. A user
of a Windows 98 computer calls you one day and says he is unable to
access resources on the network. You type ipconfig on the user's
computer and receive the following output:
0 Ethernet adapter:
IP address: 169.254.1.17
Subnet Mask: 255.255.0.0
Default Gateway :...
You also check your NIC and see the link light on. What might the
problem be?. Answer: -Unavailable DHCP server
