2026/2027 | 200 Questions and Verified Answers | Complete
Q&A Guide | A+ Graded
1. How often must Roadway Worker Protection (RWP) training be renewed?
A. Every six months
B. Annually
C. Every two years
D. Every five years
Correct Answer: B
Explanation: RWP training must be renewed annually to ensure all roadway workers maintain current
knowledge of safety rules, regulations, and procedures. This requirement applies to all personnel
regardless of rank or title before entering the roadway.
2. What is the Cardinal Rule of Railroading?
A. Always maintain eye contact with train operators
B. Always expect a train or equipment to move on any track in either direction at any time
C. Never walk between moving rail cars
D. Always wear highvisibility clothing
Correct Answer: B
,Explanation: The Cardinal Rule of Railroading is the foundation of all railroad safety: always expect a
train or equipment to move on any track in either direction at any time, regardless of signal indications
or prior information. This mindset prevents complacency and ensures constant vigilance.
3. "Fouling" the track means being within how many feet of the field side of the nearest rail?
A. 4 feet
B. 6 feet
C. 8 feet
D. 10 feet
Correct Answer: A
Explanation: You are considered "fouling" a track if you are within 4 feet of the near rail or in a position
where you could be struck by moving equipment. This 4foot distance is the critical safety boundary.
4. According to the FRA, when working in the foul:
A. Workers are protected by automatic signals
B. A person or equipment could be struck by a train or ontrack equipment
C. Workers must always have a lookout
D. Only certified workers are permitted
Correct Answer: B
,Explanation: When working in the foul, a person or equipment could be struck by a train or ontrack
equipment. This is why ontrack safety protection is required.
5. Which of the following individuals are considered roadway workers?
A. BNSF track maintenance employees only
B. Contractor employees whose duties for a railroad client may require fouling a track
C. Only employees working directly on the tracks
D. Only flaggers and watchmen
Correct Answer: B
Explanation: Roadway workers include any person (including contractor employees) whose duties
require them to foul a track. This broad definition ensures all personnel who may be exposed to ontrack
hazards receive appropriate training and protection.
6. When are roadway workers responsible to ascertain that ontrack safety is provided?
A. After beginning work
B. Prior to fouling the track
C. At the end of the work shift
D. Only when a supervisor is present
Correct Answer: B
, Explanation: Roadway workers are individually responsible to ascertain that ontrack safety is provided
before they foul a track. This personal responsibility cannot be delegated.
7. A roadway worker shall not foul a track except:
A. When necessary for the performance of duty
B. When a supervisor gives permission
C. During daylight hours only
D. When no trains are scheduled
Correct Answer: A
Explanation: A roadway worker shall not foul a track except when necessary for the performance of
duty. Fouling a track for any other reason is prohibited.
8. Roadway workers who perform work in the fouling space must do all of the following EXCEPT:
A. Receive RWP training
B. Understand ontrack safety methods
C. Be trained in the General Code of Operating Rules (GCOR)
D. Participate in job safety briefings
Correct Answer: C