ASE A1 (Engine Repair) Practice Test - Cumulative Questions and
Answers with Verified Solutions | Latest 2026 Update
Q: a vehicle is equipped with a coolant recovery system. coolant does not return to
the radiator
Answer:
when the engine cools.
A says that the transfer hose may be plugged.
B says that the filler neck soldered joint could be cracked
Q: A
Answer:
B
Both
Neither both
Q: both a plugged transfer hose and a cracked filler neck soldered joint could
prevent coolant from
Answer:
returning to the radiator when the engine cools
, ASE A1 (Engine Repair) Practice Test - Cumulative Questions and
Answers with Verified Solutions | Latest 2026 Update
Q: a thermostat-testing setup is shown in the figure.
Answer:
A says the thermostat will start to open when the water boils.
B says the thermostat valve should be fully open when the temp equals the rated
temp
stamped on the thermostat
Q: A
Answer:
B
Both
Neither Neither
Q: the thermostat should be fully open long before the water starts to boil
Answer:
, ASE A1 (Engine Repair) Practice Test - Cumulative Questions and
Answers with Verified Solutions | Latest 2026 Update
Q: the thermostat should start to open when the water temperature reaches its rated
Answer:
temperature
Q: serpentine belt stretch is indicated by:
Answer:
Q: using a belt tension gauge
Answer:
belt deflection
a squealing noise at idle
using the scale on the tensioner housing using the scale on the tensioner housing
Q: a belt tensioner gauge is used to check tension on standard v-belts
Answer:
, ASE A1 (Engine Repair) Practice Test - Cumulative Questions and
Answers with Verified Solutions | Latest 2026 Update
Q: measuring belt deflection on a v-ribbed belt is not the best method
Answer:
Q: a squealing noise at idle would indicate a loose or worn belt
Answer:
Q: A says that an engine oil cooler can be located inside one of the radiator tanks.
Answer:
B says that an engine oil cooler can be mounted ahead of the radiator support
Q: A
Answer:
B
Both
Neither Both
Answers with Verified Solutions | Latest 2026 Update
Q: a vehicle is equipped with a coolant recovery system. coolant does not return to
the radiator
Answer:
when the engine cools.
A says that the transfer hose may be plugged.
B says that the filler neck soldered joint could be cracked
Q: A
Answer:
B
Both
Neither both
Q: both a plugged transfer hose and a cracked filler neck soldered joint could
prevent coolant from
Answer:
returning to the radiator when the engine cools
, ASE A1 (Engine Repair) Practice Test - Cumulative Questions and
Answers with Verified Solutions | Latest 2026 Update
Q: a thermostat-testing setup is shown in the figure.
Answer:
A says the thermostat will start to open when the water boils.
B says the thermostat valve should be fully open when the temp equals the rated
temp
stamped on the thermostat
Q: A
Answer:
B
Both
Neither Neither
Q: the thermostat should be fully open long before the water starts to boil
Answer:
, ASE A1 (Engine Repair) Practice Test - Cumulative Questions and
Answers with Verified Solutions | Latest 2026 Update
Q: the thermostat should start to open when the water temperature reaches its rated
Answer:
temperature
Q: serpentine belt stretch is indicated by:
Answer:
Q: using a belt tension gauge
Answer:
belt deflection
a squealing noise at idle
using the scale on the tensioner housing using the scale on the tensioner housing
Q: a belt tensioner gauge is used to check tension on standard v-belts
Answer:
, ASE A1 (Engine Repair) Practice Test - Cumulative Questions and
Answers with Verified Solutions | Latest 2026 Update
Q: measuring belt deflection on a v-ribbed belt is not the best method
Answer:
Q: a squealing noise at idle would indicate a loose or worn belt
Answer:
Q: A says that an engine oil cooler can be located inside one of the radiator tanks.
Answer:
B says that an engine oil cooler can be mounted ahead of the radiator support
Q: A
Answer:
B
Both
Neither Both
