Afab 110 final blue prints Exam Questions with Correct Answers
Question 1:
Which of the following is not an example of a spatial instrument?
Answer:
playing 3d tic tac toe
Question 2:
There are three dimension terms common to drafting education. which of the following is not
correct?
Answer:
Length
Question 3:
The type of section view where the section view is no longer aligned in projection with other
views is: removed
revolved broken-out offset
Answer:
offset
Question 4:
Cylindrical object with an odd number of features, such as spokes or holes on a bolt circle,
could be better described with a section.
Answer:
Aligned
Question 5:
The broken-out section requires another type of line from the alphabet of lines to help show
where the removed portion was broken off in a jagged sort of way. this is the line.
Answer:
Short break
, Question 6:
When a section is created, it can be overlaid on the view or short break lines can be used on
each side of th e view to seperate it from the other visible lines.
Answer:
RevolvedRevolved
Revolved
Revolved
Question 7:
Type of section wherein the section view is probably located out of projection with the other
regular or auxiliary views is a section.
Answer:
Removed
Question 8:
There is a conventional practice that allows the drafter to leave a feature unhatched, even
though the cutting-plane line passes through it. Which of the following is not relevent to this
conventional practice?
Answer:
Hole
Question 9:
If there is a large area that needs to receive section lines, the section allows for the section lines
to only be applied around the perimeter.
Answer:
outline
Question 10:
In assembly drawings, there may be some parts that do not receive section lines, but rather the
area cut by the cutting-plane line is filled-in solid. Which of the following is not relevant to this
conventional practice?
Answer:
Springs
Question 11:
T/F each type of line in the standards has one, and only one, option for its appearance.
Answer:
False
Question 1:
Which of the following is not an example of a spatial instrument?
Answer:
playing 3d tic tac toe
Question 2:
There are three dimension terms common to drafting education. which of the following is not
correct?
Answer:
Length
Question 3:
The type of section view where the section view is no longer aligned in projection with other
views is: removed
revolved broken-out offset
Answer:
offset
Question 4:
Cylindrical object with an odd number of features, such as spokes or holes on a bolt circle,
could be better described with a section.
Answer:
Aligned
Question 5:
The broken-out section requires another type of line from the alphabet of lines to help show
where the removed portion was broken off in a jagged sort of way. this is the line.
Answer:
Short break
, Question 6:
When a section is created, it can be overlaid on the view or short break lines can be used on
each side of th e view to seperate it from the other visible lines.
Answer:
RevolvedRevolved
Revolved
Revolved
Question 7:
Type of section wherein the section view is probably located out of projection with the other
regular or auxiliary views is a section.
Answer:
Removed
Question 8:
There is a conventional practice that allows the drafter to leave a feature unhatched, even
though the cutting-plane line passes through it. Which of the following is not relevent to this
conventional practice?
Answer:
Hole
Question 9:
If there is a large area that needs to receive section lines, the section allows for the section lines
to only be applied around the perimeter.
Answer:
outline
Question 10:
In assembly drawings, there may be some parts that do not receive section lines, but rather the
area cut by the cutting-plane line is filled-in solid. Which of the following is not relevant to this
conventional practice?
Answer:
Springs
Question 11:
T/F each type of line in the standards has one, and only one, option for its appearance.
Answer:
False
