NCIDQ IDFX Practice Exam Questions and
Answers with Verified Solutions | Latest
Updated 2026
Which tool is best for documenting adjacency matrix
spatial proximity, related activities
and identifying priorities:
Conducting a site analysis is? due diligence
A design that addresses the Universal
maximum number of individuals
regardless of mental or physical
ability level is called what type of
design?
A criteria matrix is used for: organizing programming information
An object located in the egress below 27" (685 mm) or above 80" (2115
path mm) AFF
of travel that projects more than
4″D
(100 mm) must be mounted:
Clearance around an accessible 60" (1500 mm) along the rear wall and 56"
(barrier free) toilet must be at (1420
least: mm) along the side wall
,Which ceiling system would you integrated ceiling system
use
to accommodate acoustical ceiling
tile, light fixtures, supply and return
air grilles, fire sprinklers and
partition
attachments in a consistent,
unified
way?
Tactile characters on signs shall 48 inches (1220 mm)
be
located a minimum of how many
inches (mm) above the finish floor.
What testing method and standard ASTM E-84 (Steiner Tunnel Test)
is
used for interior wall and ceiling
textile finishes?
When making furniture decisions, all of these: industry standards, federal,
what should the interior designer state and
consider? local restrictions related to FF&E, FF&E
requirements established by a rating
system such
as LEED
________________ is best Equipment
located with the
help of drawings, as much of it is
related to the communication,
electrical, and other architectural
features of the building.
, A schedule for construction window treatment hardware
drawings would be used to
indicate
all of the following except?
What would be the best way to Indicate on the drawings and in the
ensure that the finish on new specifications
millwork matches the finish on that the new work should match the
existing millwork on a remodeling existing work.
project?
When conducting field verification Establishing a dimension convention prior
of to
a space to document existing commencing site work
conditions, which of the following
steps is most important?
What is the term used for the benchmarking
aspect
of reviewing best practices within
an
industry by comparing a firm's
activities or functions with others in
the field?
In the programming phase of a observation is best used to verify
project, an interior designer is information
busy gathered in interviews or questionnaires
collecting information during a site
visit.
Which is one possible reason to
verify results using another
method?
Answers with Verified Solutions | Latest
Updated 2026
Which tool is best for documenting adjacency matrix
spatial proximity, related activities
and identifying priorities:
Conducting a site analysis is? due diligence
A design that addresses the Universal
maximum number of individuals
regardless of mental or physical
ability level is called what type of
design?
A criteria matrix is used for: organizing programming information
An object located in the egress below 27" (685 mm) or above 80" (2115
path mm) AFF
of travel that projects more than
4″D
(100 mm) must be mounted:
Clearance around an accessible 60" (1500 mm) along the rear wall and 56"
(barrier free) toilet must be at (1420
least: mm) along the side wall
,Which ceiling system would you integrated ceiling system
use
to accommodate acoustical ceiling
tile, light fixtures, supply and return
air grilles, fire sprinklers and
partition
attachments in a consistent,
unified
way?
Tactile characters on signs shall 48 inches (1220 mm)
be
located a minimum of how many
inches (mm) above the finish floor.
What testing method and standard ASTM E-84 (Steiner Tunnel Test)
is
used for interior wall and ceiling
textile finishes?
When making furniture decisions, all of these: industry standards, federal,
what should the interior designer state and
consider? local restrictions related to FF&E, FF&E
requirements established by a rating
system such
as LEED
________________ is best Equipment
located with the
help of drawings, as much of it is
related to the communication,
electrical, and other architectural
features of the building.
, A schedule for construction window treatment hardware
drawings would be used to
indicate
all of the following except?
What would be the best way to Indicate on the drawings and in the
ensure that the finish on new specifications
millwork matches the finish on that the new work should match the
existing millwork on a remodeling existing work.
project?
When conducting field verification Establishing a dimension convention prior
of to
a space to document existing commencing site work
conditions, which of the following
steps is most important?
What is the term used for the benchmarking
aspect
of reviewing best practices within
an
industry by comparing a firm's
activities or functions with others in
the field?
In the programming phase of a observation is best used to verify
project, an interior designer is information
busy gathered in interviews or questionnaires
collecting information during a site
visit.
Which is one possible reason to
verify results using another
method?
