ASBESTOS CONTRACTOR/SUPERVISOR EXAMINATION |
COMPLETE QUESTIONS WITH 100% RATED EXPERT SOLUTIONS
|2026 LATEST UPDATED
Fibers - (answer)Asbestos is a generic name for a group of minerals that form
__________
Hood, booties, coveralls - (answer)The following are parts of a protective clothing
ensemble
Removal of 5 feet of pipe insulation in order to fix a leak in the pipe -
(answer)Which of the following operations would be considered to be an OSHA
Class II job?
Holes cut in the polyethylene next to the machines - (answer)Make-up air for a
negative pressure enclosure usually comes from
Sealed, labeled containers or wraps - (answer)All asbestos waste must be
,Inhalation - (answer)Asbestos enters the body via
Guard rails - (answer)Free standing mobile scaffolding that is 16 feet high are
required to have LOCKABLE WHEELS, NOT TO BE LESS THAN 4 FEET
WIDE, BE INSPECTED BY A COMPETENT PERSON, and must have what?
The removal of all specified asbestos-containing materials - (answer)A final visual
inspection is used to determine which one of the final steps of an abatement
project?
50-90 times - (answer)How much greater is the incidence of lung cancer in
asbestos workers who smoke than in non-asbestos workers who do not smoke?
Personal air monitoring - (answer)Which of the following records must be kept for
a minimum of 30 years?
, Any job where the amount of friable ACM being removed is less than 260 linear
feet or 160 square feet - (answer)AHERA regulations allow PCM to be used as a
method of analysis for:
Visible emissions - (answer)When removing asbestos-containing materials, which
of the following is most difficult to control?
OSHA - (answer)What federal agency regulates asbestos in the manufacturing
sector through 29CFR 1910.1001 and in the construction industry through 29 CFR
1926.1101?
2 layers of 4 mil on the walls and 2 layers of 6 mil on the floors - (answer)When
constructing a negative pressure containment for abatement, common practice is to
place polyethylene sheeting on the walls and floors consisting of
HEPA vacuuming protective clothing before leaving the work area - (answer)The
following personal hygiene practice could reduce the chances of asbestos exposure
COMPLETE QUESTIONS WITH 100% RATED EXPERT SOLUTIONS
|2026 LATEST UPDATED
Fibers - (answer)Asbestos is a generic name for a group of minerals that form
__________
Hood, booties, coveralls - (answer)The following are parts of a protective clothing
ensemble
Removal of 5 feet of pipe insulation in order to fix a leak in the pipe -
(answer)Which of the following operations would be considered to be an OSHA
Class II job?
Holes cut in the polyethylene next to the machines - (answer)Make-up air for a
negative pressure enclosure usually comes from
Sealed, labeled containers or wraps - (answer)All asbestos waste must be
,Inhalation - (answer)Asbestos enters the body via
Guard rails - (answer)Free standing mobile scaffolding that is 16 feet high are
required to have LOCKABLE WHEELS, NOT TO BE LESS THAN 4 FEET
WIDE, BE INSPECTED BY A COMPETENT PERSON, and must have what?
The removal of all specified asbestos-containing materials - (answer)A final visual
inspection is used to determine which one of the final steps of an abatement
project?
50-90 times - (answer)How much greater is the incidence of lung cancer in
asbestos workers who smoke than in non-asbestos workers who do not smoke?
Personal air monitoring - (answer)Which of the following records must be kept for
a minimum of 30 years?
, Any job where the amount of friable ACM being removed is less than 260 linear
feet or 160 square feet - (answer)AHERA regulations allow PCM to be used as a
method of analysis for:
Visible emissions - (answer)When removing asbestos-containing materials, which
of the following is most difficult to control?
OSHA - (answer)What federal agency regulates asbestos in the manufacturing
sector through 29CFR 1910.1001 and in the construction industry through 29 CFR
1926.1101?
2 layers of 4 mil on the walls and 2 layers of 6 mil on the floors - (answer)When
constructing a negative pressure containment for abatement, common practice is to
place polyethylene sheeting on the walls and floors consisting of
HEPA vacuuming protective clothing before leaving the work area - (answer)The
following personal hygiene practice could reduce the chances of asbestos exposure
