DANTE LEVEL 2 QUESTIONS AND ANSWERS SURE
A+
✔✔Suppose a Dante device has one channel and two transmit flows. Can it connect to
three different receiving devices? - ✔✔Yes. The channel must be sent as multicast.
✔✔Can a Dante network with five switch hops support latency of 1 msec? - ✔✔Yes.
Minimum recommended latency could be as low as 0.5 msec.
✔✔A unicast subscription is made between two Dante devices.
The latency value of the transmitter and receiver are 0.25msec and 0.5msec,
respectively.
What is the resulting latency of this stream? - ✔✔0.5 msec
✔✔Approximately how much bandwidth does a unicast audio flow use? (4-ch, 24-bit,
48kHz, 1msec latency) - ✔✔6Mbps
✔✔ Dante Controller can recall part of a preset - only storing information about some
settings and/or limiting which devices we want to recall them on. - ✔✔True
✔✔What advantages does unicast have over multicast communication? (Select 3.) -
✔✔Unicast is simpler to deliver, reducing the strain on the switch.
Unicast can achieve lower latency than multicast. (Minimum latency for multicast is
1msec.)
Unicast can cross a router, multicast cannot.
✔✔A multicast subscription is made between two Dante devices. The latency value of
the transmitter and receiver are 0.25msec and 0.5msec, respectively. What is the
resulting latency of this stream? - ✔✔1.0 msec
A+
✔✔Suppose a Dante device has one channel and two transmit flows. Can it connect to
three different receiving devices? - ✔✔Yes. The channel must be sent as multicast.
✔✔Can a Dante network with five switch hops support latency of 1 msec? - ✔✔Yes.
Minimum recommended latency could be as low as 0.5 msec.
✔✔A unicast subscription is made between two Dante devices.
The latency value of the transmitter and receiver are 0.25msec and 0.5msec,
respectively.
What is the resulting latency of this stream? - ✔✔0.5 msec
✔✔Approximately how much bandwidth does a unicast audio flow use? (4-ch, 24-bit,
48kHz, 1msec latency) - ✔✔6Mbps
✔✔ Dante Controller can recall part of a preset - only storing information about some
settings and/or limiting which devices we want to recall them on. - ✔✔True
✔✔What advantages does unicast have over multicast communication? (Select 3.) -
✔✔Unicast is simpler to deliver, reducing the strain on the switch.
Unicast can achieve lower latency than multicast. (Minimum latency for multicast is
1msec.)
Unicast can cross a router, multicast cannot.
✔✔A multicast subscription is made between two Dante devices. The latency value of
the transmitter and receiver are 0.25msec and 0.5msec, respectively. What is the
resulting latency of this stream? - ✔✔1.0 msec
