AVIXA CTS-I study Questions and Answers with Verified Solutions |
Latest 2026 Update
Q: A. that it cannot differentiate between the direct loudspeaker sound and the
interference from
Answer:
combined direct and reflected energy
B. that an RTA is not available as a smartphone app, as computer software, or as
dedicated
hardware
C. that it cannot differentiate between high and low frequencies
D. that it is not legal in some jurisdictions A. that it cannot differentiate between the
direct
loudspeaker sound and the interference from combined direct and reflected energy
Q: 2. The advantages of using a dual-channel FFT analyzer to adjust equalization
include
Answer:
_ (Choose all that apply.)
,AVIXA CTS-I study Questions and Answers with Verified Solutions |
Latest 2026 Update
Q: A. viewing the sound spectrum in both the frequency and time domain
Answer:
B. identifying reflections in the room and isolating only the signals you want
to measure
C. being less complicated than the RTA method
D. the ability to be optimized for different types of music A. viewing the sound
spectrum in
both the frequency and time domain
B. identifying reflections in the room and isolating only the signals you want to
measure
Q: 3. A reference microphone for setting equalization of a speaker system should
Answer:
(Choose all that apply.)
,AVIXA CTS-I study Questions and Answers with Verified Solutions |
Latest 2026 Update
Q: A. be the same brand and type used in the system as designed
Answer:
B. be omnidirectional
C. have a flat, on-axis response
Q: D. have a nonreflective surface
Answer:
B. be omnidirectional
C. have a flat, on-axis response
Q: 4. After adjusting system equalization using the best tools available, you should
Answer:
. (Choose all that apply.)
, AVIXA CTS-I study Questions and Answers with Verified Solutions |
Latest 2026 Update
Q: A. balance amp and EQ levels by ear for best tonality
Answer:
B. check the system by listening to familiar audio content
C. check the system for distortion by listening at the highest expected volume
D. change equalization off-axis to fix coverage problems A. balance amp and EQ
levels by ear
for best tonality
B. check the system by listening to familiar audio content
C. check the system for distortion by listening at the highest expected volume
Q: 5. Which of the following are features of an audio signal generator?
Answer:
(Choose all that apply.)
Latest 2026 Update
Q: A. that it cannot differentiate between the direct loudspeaker sound and the
interference from
Answer:
combined direct and reflected energy
B. that an RTA is not available as a smartphone app, as computer software, or as
dedicated
hardware
C. that it cannot differentiate between high and low frequencies
D. that it is not legal in some jurisdictions A. that it cannot differentiate between the
direct
loudspeaker sound and the interference from combined direct and reflected energy
Q: 2. The advantages of using a dual-channel FFT analyzer to adjust equalization
include
Answer:
_ (Choose all that apply.)
,AVIXA CTS-I study Questions and Answers with Verified Solutions |
Latest 2026 Update
Q: A. viewing the sound spectrum in both the frequency and time domain
Answer:
B. identifying reflections in the room and isolating only the signals you want
to measure
C. being less complicated than the RTA method
D. the ability to be optimized for different types of music A. viewing the sound
spectrum in
both the frequency and time domain
B. identifying reflections in the room and isolating only the signals you want to
measure
Q: 3. A reference microphone for setting equalization of a speaker system should
Answer:
(Choose all that apply.)
,AVIXA CTS-I study Questions and Answers with Verified Solutions |
Latest 2026 Update
Q: A. be the same brand and type used in the system as designed
Answer:
B. be omnidirectional
C. have a flat, on-axis response
Q: D. have a nonreflective surface
Answer:
B. be omnidirectional
C. have a flat, on-axis response
Q: 4. After adjusting system equalization using the best tools available, you should
Answer:
. (Choose all that apply.)
, AVIXA CTS-I study Questions and Answers with Verified Solutions |
Latest 2026 Update
Q: A. balance amp and EQ levels by ear for best tonality
Answer:
B. check the system by listening to familiar audio content
C. check the system for distortion by listening at the highest expected volume
D. change equalization off-axis to fix coverage problems A. balance amp and EQ
levels by ear
for best tonality
B. check the system by listening to familiar audio content
C. check the system for distortion by listening at the highest expected volume
Q: 5. Which of the following are features of an audio signal generator?
Answer:
(Choose all that apply.)
