Wisconsin Boater's Safety Exam Questions and Answers with
Verified Solutions | Latest 2026 Update
Q: Which side of the vessel is the port side?
Answer:
Left
Q: Which part of the vessel is the stern?
Answer:
Rear
Q: What are the two basic types of vessel hulls?
Answer:
Displacement & Planing
Q: What are the three basic hull shapes?
Answer:
Round Bottom, Flat Bottom, Vee Bottom
Q: What are the four length classes of vessels?
Answer:
Less than 16ft, 16ft to less than 26ft, 26ft to less than 40ft, 40ft to less than 65ft
Q: What are the four types of engines?
Answer:
Outboard, Inboard, Stern Drive and Jet Drive
Q: What do stern drive and inboard engines have in common?
Answer:
They are both automotive engines adapted for marine use.
Q: How does the US Coast Guard classify a PWC?
Answer:
As an inboard vessel
Q: Are PWC subject to the laws and requirements of other vessels?
, Answer:
Yes
Q: What do you call a device that is used to pump and force water under pressure
through a steering nozzle at the rear of a vessel?
Answer:
Impeller
Q: What information is displayed on the capacity plate of an outboard
powerboat?
Answer:
Capacity in pounds or number of people and recommended maximum horsepower.
Name three things that should be included on your float plan before you embark on
an extended outing.
- Vessel Description, Passengers, Trip Plan
Q: What three things should you do while filling the fuel tank of your vessel?
Answer:
Keep the nozzle in contact with the tank opening, fill tank slowly and avoid
spilling fuel, and never fill and tank to the brim.
Q: What rule of thumb is used to prevent running out of fuel?
Answer:
1/3 Out, 1/3 In, 1/3 In Reserve
Q: When should you get the next larger trailer to tow your vessel?
Answer:
If the combined weight of the vessel and its engine is more than 90% of the
recommended load capacity of the trailer.
Q: What is tongue weight?
Answer:
The amount of the loaded trailer's weight that presses down on the towing hitch
Q: How should two strong safety chains be secured to support the trailer's
coupler in case it comes disconnected from the towing vehicle?
Verified Solutions | Latest 2026 Update
Q: Which side of the vessel is the port side?
Answer:
Left
Q: Which part of the vessel is the stern?
Answer:
Rear
Q: What are the two basic types of vessel hulls?
Answer:
Displacement & Planing
Q: What are the three basic hull shapes?
Answer:
Round Bottom, Flat Bottom, Vee Bottom
Q: What are the four length classes of vessels?
Answer:
Less than 16ft, 16ft to less than 26ft, 26ft to less than 40ft, 40ft to less than 65ft
Q: What are the four types of engines?
Answer:
Outboard, Inboard, Stern Drive and Jet Drive
Q: What do stern drive and inboard engines have in common?
Answer:
They are both automotive engines adapted for marine use.
Q: How does the US Coast Guard classify a PWC?
Answer:
As an inboard vessel
Q: Are PWC subject to the laws and requirements of other vessels?
, Answer:
Yes
Q: What do you call a device that is used to pump and force water under pressure
through a steering nozzle at the rear of a vessel?
Answer:
Impeller
Q: What information is displayed on the capacity plate of an outboard
powerboat?
Answer:
Capacity in pounds or number of people and recommended maximum horsepower.
Name three things that should be included on your float plan before you embark on
an extended outing.
- Vessel Description, Passengers, Trip Plan
Q: What three things should you do while filling the fuel tank of your vessel?
Answer:
Keep the nozzle in contact with the tank opening, fill tank slowly and avoid
spilling fuel, and never fill and tank to the brim.
Q: What rule of thumb is used to prevent running out of fuel?
Answer:
1/3 Out, 1/3 In, 1/3 In Reserve
Q: When should you get the next larger trailer to tow your vessel?
Answer:
If the combined weight of the vessel and its engine is more than 90% of the
recommended load capacity of the trailer.
Q: What is tongue weight?
Answer:
The amount of the loaded trailer's weight that presses down on the towing hitch
Q: How should two strong safety chains be secured to support the trailer's
coupler in case it comes disconnected from the towing vehicle?
