JLTV FINAL PAPER REVIEW GUIDE WITH
VERIFIED ITEMS AND SOLUTION
WALKTHROUGH
●● 2. Why do the High Pressure Gas (HPG) pumps automatically stop
running after running continuously for 10 minutes?
A. To prevent overcharging of the suspension components and HPG
Spring components
B. To prevent the SPNSN ERROR light from illuminating
C. To prevent the hydraulic pumps that power the springs' pumps from
overheating
D. To prevent system leakage
Answer: C. To prevent the hydraulic pumps that power the springs'
pumps from overheating
●● 3. The transaxle receives power from the
A. Engine
B. Transmission
C. CTIS
D. Suspension system
Answer: Transmission
●● Height for mudding stuff
,Answer: 30in, 60in
●● 5. Air over hydraulic brakes function by:
A. The engine-driven belt provides power to the hydraulic pumps for the
brakes.
B. The air pressure for service brakes is monitored by the CTIS, CTIS
sends the signal to the hydraulic components of when to apply or not
apply.
C. The CAC controls the air circulation directly to the service brake,
when the service brake is engaged it pushes hydraulic fluid through the
lines to activate the brakes.
When the air system is charged, the air pressure holds the hydraulic
braking components open so they cannot apply; when service brake
applied, it drops psi allowing hydraulic components to apply/engage.
Answer: When the air system is charged, the air pressure holds the
hydraulic braking components open so they cannot apply; when service
brake applied, it drops psi allowing hydraulic components to
apply/engage.
●● Locate the buttons on the MUX panel
Answer: Blackout Switch
Head Lights and Clearence Lights
Internal Dome Light Selector
Dome Light Dimmer
Dash Light Dimmer
, ●● 7. List the five Suspension Settings the DRIVER uses.
Answer: Answer: Operational, Loading, Tie Down, Fording, and SAES
●● 8. Combat Override is only to be used in emergency situations,
which of the factors below are true for how Combat Override affects the
JLTV?
A. Provides for an emergency bypass in the event of DSDU failure.
B. Disables neutral safety start
C. Bypasses all speed limitations protecting the drivetrain and CTIS
settings protecting the wheels
D. All of the above.
Answer: All of the above
●● 9. What tool is shown below and what is its purpose?
Answer: An emergency ingress tool, which is used to open the doors in
the event of a casualty or rollover
●● 10. What do you do if an item in the Basic Issue Items (BIl) appears
to be broken or unserviceable?
A. Try to fix it.
B. Annotate it on the BIl Inventory as serviceable.
C. Annotate it on the Bll Inventory as unserviceable and then continue
with your mission.
VERIFIED ITEMS AND SOLUTION
WALKTHROUGH
●● 2. Why do the High Pressure Gas (HPG) pumps automatically stop
running after running continuously for 10 minutes?
A. To prevent overcharging of the suspension components and HPG
Spring components
B. To prevent the SPNSN ERROR light from illuminating
C. To prevent the hydraulic pumps that power the springs' pumps from
overheating
D. To prevent system leakage
Answer: C. To prevent the hydraulic pumps that power the springs'
pumps from overheating
●● 3. The transaxle receives power from the
A. Engine
B. Transmission
C. CTIS
D. Suspension system
Answer: Transmission
●● Height for mudding stuff
,Answer: 30in, 60in
●● 5. Air over hydraulic brakes function by:
A. The engine-driven belt provides power to the hydraulic pumps for the
brakes.
B. The air pressure for service brakes is monitored by the CTIS, CTIS
sends the signal to the hydraulic components of when to apply or not
apply.
C. The CAC controls the air circulation directly to the service brake,
when the service brake is engaged it pushes hydraulic fluid through the
lines to activate the brakes.
When the air system is charged, the air pressure holds the hydraulic
braking components open so they cannot apply; when service brake
applied, it drops psi allowing hydraulic components to apply/engage.
Answer: When the air system is charged, the air pressure holds the
hydraulic braking components open so they cannot apply; when service
brake applied, it drops psi allowing hydraulic components to
apply/engage.
●● Locate the buttons on the MUX panel
Answer: Blackout Switch
Head Lights and Clearence Lights
Internal Dome Light Selector
Dome Light Dimmer
Dash Light Dimmer
, ●● 7. List the five Suspension Settings the DRIVER uses.
Answer: Answer: Operational, Loading, Tie Down, Fording, and SAES
●● 8. Combat Override is only to be used in emergency situations,
which of the factors below are true for how Combat Override affects the
JLTV?
A. Provides for an emergency bypass in the event of DSDU failure.
B. Disables neutral safety start
C. Bypasses all speed limitations protecting the drivetrain and CTIS
settings protecting the wheels
D. All of the above.
Answer: All of the above
●● 9. What tool is shown below and what is its purpose?
Answer: An emergency ingress tool, which is used to open the doors in
the event of a casualty or rollover
●● 10. What do you do if an item in the Basic Issue Items (BIl) appears
to be broken or unserviceable?
A. Try to fix it.
B. Annotate it on the BIl Inventory as serviceable.
C. Annotate it on the Bll Inventory as unserviceable and then continue
with your mission.
