MA 2A hoisting Exam Questions and
Answers with Verified Solutions | Latest
Updated 2026
What is the purpose of the To establish rules and regulations for
520:C.M.R.6:00 safety of the public
What regulatory authority 520-C.M.R. 6:00 MGL chapter 146 section
governs hoisting machinery 53-54A
What type of system is used Lock out tag out
when working on de-
energized circuit
In event of death, department Within 1 hour of incident
of public safety must how
soon
When are reports of injury that Immediately After the person has been
required hospitalization or treated
medical treatment sent to the
engineering section of
department of public safety
All welding and cutting on American society of mechanical
hoisting equipment must be engineering (ASME)
done in accordance with
requirements of what
, What items should be Wire ropes, bearings, gears, friction
checked on daily inspection clutches, brakes, chain drives and
anything subject to wear
What type of protection Protection from weather, heat in winter,
should be given to the safety glasses, hard hat, roll over
operator of material handling protective system
and moving equipment
What equipment requires Height of lift exceed 10' or weight of load
hoisting license exceed 500 lbs or the capacity of the
bucket is more than 1/4 cubic yard
What is the minimum absolute 125,000 volts = 10'
limit of approach of power 250,000 volts = 15'
lines when operating 250,000 volts or more = 25'
equipment
How do you test the load Pick test, lift load about 1', hold it for one
brakes minute
How should you approach Approach any vehicle to the side slow
and load any vehicle and square
How should you carry a load Carry and load 12-18" off the ground
How close to a marked utility Hand dig within 18" of marked utility
can you dig
Answers with Verified Solutions | Latest
Updated 2026
What is the purpose of the To establish rules and regulations for
520:C.M.R.6:00 safety of the public
What regulatory authority 520-C.M.R. 6:00 MGL chapter 146 section
governs hoisting machinery 53-54A
What type of system is used Lock out tag out
when working on de-
energized circuit
In event of death, department Within 1 hour of incident
of public safety must how
soon
When are reports of injury that Immediately After the person has been
required hospitalization or treated
medical treatment sent to the
engineering section of
department of public safety
All welding and cutting on American society of mechanical
hoisting equipment must be engineering (ASME)
done in accordance with
requirements of what
, What items should be Wire ropes, bearings, gears, friction
checked on daily inspection clutches, brakes, chain drives and
anything subject to wear
What type of protection Protection from weather, heat in winter,
should be given to the safety glasses, hard hat, roll over
operator of material handling protective system
and moving equipment
What equipment requires Height of lift exceed 10' or weight of load
hoisting license exceed 500 lbs or the capacity of the
bucket is more than 1/4 cubic yard
What is the minimum absolute 125,000 volts = 10'
limit of approach of power 250,000 volts = 15'
lines when operating 250,000 volts or more = 25'
equipment
How do you test the load Pick test, lift load about 1', hold it for one
brakes minute
How should you approach Approach any vehicle to the side slow
and load any vehicle and square
How should you carry a load Carry and load 12-18" off the ground
How close to a marked utility Hand dig within 18" of marked utility
can you dig
