3rd TSSA Part A2 - Test (III) Exam Questions with Correct Answers
and Answers with Verified Solutions | Latest 2026 Update
Q: fire extinguishment or knockdown capabilities AFFF. If a conductor is moved
relative to a magnetic field so as to "cut" the magnetic flux then a/an _____ will
be induced in the conductor. Emf. Some of the characteristics of the series direct
current motor include: 1. A small current at no- load conditions. 2. The danger
of overspeed as the load is removed. 3. The load current equals the excitation
current. 4. Its speed is directly proportional to field flux. 1, 2, 3 Which of the
following characteristics will determine the strength of a pipe ?
Answer:
1. Wall thickness 2. Pipe length 3. Material used 4. Temperature to which it is
subjected 5. Whether seamless or welded 1, 3, 4, 5
,Q: Water hammer may occur in _____ lines.
Answer:
1. Steam
2. Water
3. Air
4. Oil 1, 2, 4
The coefficient of expansion of aluminum is _____ that of copper. More than
The quantity of current flow depends on: The intensity of the emf.
The smart transmitter is a digital device, containing an on-board _____ complete
with memory.
Microprocessor
The use of expansion bends is preferred for high-pressure service since: No
maintenance is
involved and there is little likelihood of leaks developing
If carbon steel is used then the piping will be suitable for temperatures up to: 400 C
There are two possible methods of connecting up three-phase generator windings.
These are
known as the _____ and the _____ connections. Star, delta.
Before commencing work on locked out equipment, a/an _____ must verify that all
energy
sources have been effectively locked out. Worker
A MSDS is a technical document which provides detailed and comprehensive
information on a
controlled product related to:
, Q: 1. Health effects of overexposure to the product.
Answer:
2. Hazard evaluation related to the product's handling, storage and use.
3. Measures to protect workers at risk of overexposure.
4. Emergency procedures. 1, 2, 3, 4
Ohm's Law can be used to: All of the above.
The end shields of a DC generator hold the: Bearing housings.
The free valence electrons of a conductor, when connected to the poles of a battery
will move
towards: The positive pole.
The power dissipated in a resistor is 60 watts at 110 volts. The resistance is: 201.83
ohms.
The faceplate displays _____ when a particular process loop is addressed on the
graphics
display of an OIU. Pop up.
Examples of Class B hazards include:
1. Working without protective equipment.
2. Working with inadequate lighting or ventilation.
3. A slippery oil condition on main aisle way.
4. Working under a suspended load. 1, 2, 3
The main elements of a fire protection system for an industrial site include.
1. Fire pump.
2. Main water piping loops.
and Answers with Verified Solutions | Latest 2026 Update
Q: fire extinguishment or knockdown capabilities AFFF. If a conductor is moved
relative to a magnetic field so as to "cut" the magnetic flux then a/an _____ will
be induced in the conductor. Emf. Some of the characteristics of the series direct
current motor include: 1. A small current at no- load conditions. 2. The danger
of overspeed as the load is removed. 3. The load current equals the excitation
current. 4. Its speed is directly proportional to field flux. 1, 2, 3 Which of the
following characteristics will determine the strength of a pipe ?
Answer:
1. Wall thickness 2. Pipe length 3. Material used 4. Temperature to which it is
subjected 5. Whether seamless or welded 1, 3, 4, 5
,Q: Water hammer may occur in _____ lines.
Answer:
1. Steam
2. Water
3. Air
4. Oil 1, 2, 4
The coefficient of expansion of aluminum is _____ that of copper. More than
The quantity of current flow depends on: The intensity of the emf.
The smart transmitter is a digital device, containing an on-board _____ complete
with memory.
Microprocessor
The use of expansion bends is preferred for high-pressure service since: No
maintenance is
involved and there is little likelihood of leaks developing
If carbon steel is used then the piping will be suitable for temperatures up to: 400 C
There are two possible methods of connecting up three-phase generator windings.
These are
known as the _____ and the _____ connections. Star, delta.
Before commencing work on locked out equipment, a/an _____ must verify that all
energy
sources have been effectively locked out. Worker
A MSDS is a technical document which provides detailed and comprehensive
information on a
controlled product related to:
, Q: 1. Health effects of overexposure to the product.
Answer:
2. Hazard evaluation related to the product's handling, storage and use.
3. Measures to protect workers at risk of overexposure.
4. Emergency procedures. 1, 2, 3, 4
Ohm's Law can be used to: All of the above.
The end shields of a DC generator hold the: Bearing housings.
The free valence electrons of a conductor, when connected to the poles of a battery
will move
towards: The positive pole.
The power dissipated in a resistor is 60 watts at 110 volts. The resistance is: 201.83
ohms.
The faceplate displays _____ when a particular process loop is addressed on the
graphics
display of an OIU. Pop up.
Examples of Class B hazards include:
1. Working without protective equipment.
2. Working with inadequate lighting or ventilation.
3. A slippery oil condition on main aisle way.
4. Working under a suspended load. 1, 2, 3
The main elements of a fire protection system for an industrial site include.
1. Fire pump.
2. Main water piping loops.
