SACA C201 ELECTRICAL SYSTEMS CERTIFICATION EXAM QUESTIONS AND QUESTIONS|A+
GRADED|BRAND NEW!!!
can you define and test a ground? -CORRECT ANSWER-a ground is a point in the circuit that
is connected to the earth. you can use a multimeter-If the resistance is too high, it may
indicate that the ground connection is not providing adequate protection
electrical safety rules -CORRECT ANSWER-1.Always use a circuit tester or voltage detector to
check that a circuit is de-energized before working on it.
electrical safety rule -CORRECT ANSWER-Never touch electrical wiring or equipment with
wet hands or while standing on a wet surface.
electrical safety rule -CORRECT ANSWER-Do not operate electrical equipment that is
damaged, frayed, or otherwise in poor condition.
electrical safety rule -CORRECT ANSWER-Use the correct fuse or circuit breaker for the
circuit you are working on.
electrical safety rule -CORRECT ANSWER-Never remove or bypass the grounding prong on a
plug.
Electrical Safety -CORRECT ANSWER-Do not use extension cords or multiple outlet adapters
that are not rated for the equipment you are using.
, electrical safety -CORRECT ANSWER-Do not overload circuits by plugging in too many
devices or using high-powered equipment.
electrical safety -CORRECT ANSWER-Do not use electrical equipment in wet or damp
conditions unless it is specifically designed for that purpose.
electrical safety -CORRECT ANSWER-Use properly rated and properly installed surge
protectors for sensitive electronic equipment.
electrical safety -CORRECT ANSWER-Always follow the manufacturer's instructions for using
electrical equipment.
purpose of lockout tag out -CORRECT ANSWER-to prevent unexpected energization or
startup of machinery or equipment while it is being serviced or repaired.
state the two types of electrical current -CORRECT ANSWER-AC and DC
how to use a circuit tester -CORRECT ANSWER-To test a circuit, first locate the circuit breaker
or fuse that controls the circuit you want to test. Then, using the circuit tester, touch the red
probe to the live wire and the black probe to the neutral or ground wire.
what is a power source -CORRECT ANSWER-The power source is the source of electrical
energy for the circuit. It can be a battery, a generator, or a power outlet. The power source
provides the electrical current that flows through the circuit.
what is a conductor -CORRECT ANSWER-The conductor is a material that allows electricity to
flow through it, such as a wire. The conductor carries the electrical current from the power
source to the load.
what is a load -CORRECT ANSWER-The load is the device or appliance that is being powered
by the circuit. It can be a light bulb, a motor, or any other device that uses electricity. The
GRADED|BRAND NEW!!!
can you define and test a ground? -CORRECT ANSWER-a ground is a point in the circuit that
is connected to the earth. you can use a multimeter-If the resistance is too high, it may
indicate that the ground connection is not providing adequate protection
electrical safety rules -CORRECT ANSWER-1.Always use a circuit tester or voltage detector to
check that a circuit is de-energized before working on it.
electrical safety rule -CORRECT ANSWER-Never touch electrical wiring or equipment with
wet hands or while standing on a wet surface.
electrical safety rule -CORRECT ANSWER-Do not operate electrical equipment that is
damaged, frayed, or otherwise in poor condition.
electrical safety rule -CORRECT ANSWER-Use the correct fuse or circuit breaker for the
circuit you are working on.
electrical safety rule -CORRECT ANSWER-Never remove or bypass the grounding prong on a
plug.
Electrical Safety -CORRECT ANSWER-Do not use extension cords or multiple outlet adapters
that are not rated for the equipment you are using.
, electrical safety -CORRECT ANSWER-Do not overload circuits by plugging in too many
devices or using high-powered equipment.
electrical safety -CORRECT ANSWER-Do not use electrical equipment in wet or damp
conditions unless it is specifically designed for that purpose.
electrical safety -CORRECT ANSWER-Use properly rated and properly installed surge
protectors for sensitive electronic equipment.
electrical safety -CORRECT ANSWER-Always follow the manufacturer's instructions for using
electrical equipment.
purpose of lockout tag out -CORRECT ANSWER-to prevent unexpected energization or
startup of machinery or equipment while it is being serviced or repaired.
state the two types of electrical current -CORRECT ANSWER-AC and DC
how to use a circuit tester -CORRECT ANSWER-To test a circuit, first locate the circuit breaker
or fuse that controls the circuit you want to test. Then, using the circuit tester, touch the red
probe to the live wire and the black probe to the neutral or ground wire.
what is a power source -CORRECT ANSWER-The power source is the source of electrical
energy for the circuit. It can be a battery, a generator, or a power outlet. The power source
provides the electrical current that flows through the circuit.
what is a conductor -CORRECT ANSWER-The conductor is a material that allows electricity to
flow through it, such as a wire. The conductor carries the electrical current from the power
source to the load.
what is a load -CORRECT ANSWER-The load is the device or appliance that is being powered
by the circuit. It can be a light bulb, a motor, or any other device that uses electricity. The
