NEW JERSEY ASBESTOS PRACTICE EXAM 2 NEWEST 2025
COMPLETE QUESTIONS AND CORRECT DETAILED ANSWERS
(VERIFIED ANSWERS) |ALREADY GRADED A+||BRAND NEW
VERSION
Responsibility for ACM control in a building is primarily that of the - SOLUTION-owner
The category least suspected of releasing asbestos fibers into the air because of friability is -
SOLUTION-miscellaneous products
The program manager can speed up the sampling process when preparing for a building
inspection for asbestos by revealing ACM in the - SOLUTION-blueprints
Before plastic barriers are set up, the work area should be - SOLUTION-wet cleaned
What percentage of Federal, commercial, and residential construction before 1970 contained
asbestos in pipe or boiler insulation? - SOLUTION-20%
The efficiency of the negative air pressure unit or cabinet is determined by the - SOLUTION-
Magnehelic guage and the manometer
Disposal bags are primarily made of which type of plastic? - SOLUTION-A minimum of
6 mil
, A contractor must sign the contract and execute the bonds _____ days after being awarded the
bid - SOLUTION-5 days
What should be posted "in plain view" of workers at teh jobsite to ensure safety? - SOLUTION-
Emergency telephone numbers
For a negative air pressure unit or cabinet, what volt-power supply is needed? - SOLUTION-115
volt
Assembly Bill 2040 requires warning signs to state - SOLUTION-Danger- asbestos cancer and
lung hazard- keep out!
ACM stands for - SOLUTION-Asbestos Containing Material
The operating agency for each public school building in which fraible asbestos containing
materials have been identified shall monitor airborne asbestos levels in each sampling area. For
at least how many hours during a period of normal activity must this monitoring be done? -
SOLUTION-it must be done for 8 hours
What portion of insurance coverage for medical exams and monitoring as required by law must
the contractor provide? - SOLUTION-all of the cost
Mesothelioma is a cancer of - SOLUTION-the lining of the lungs
These are all true - SOLUTION-During removal, asbestos must be wetted to keep down airborne
fibers and there must be no visible emission to the outside air.
COMPLETE QUESTIONS AND CORRECT DETAILED ANSWERS
(VERIFIED ANSWERS) |ALREADY GRADED A+||BRAND NEW
VERSION
Responsibility for ACM control in a building is primarily that of the - SOLUTION-owner
The category least suspected of releasing asbestos fibers into the air because of friability is -
SOLUTION-miscellaneous products
The program manager can speed up the sampling process when preparing for a building
inspection for asbestos by revealing ACM in the - SOLUTION-blueprints
Before plastic barriers are set up, the work area should be - SOLUTION-wet cleaned
What percentage of Federal, commercial, and residential construction before 1970 contained
asbestos in pipe or boiler insulation? - SOLUTION-20%
The efficiency of the negative air pressure unit or cabinet is determined by the - SOLUTION-
Magnehelic guage and the manometer
Disposal bags are primarily made of which type of plastic? - SOLUTION-A minimum of
6 mil
, A contractor must sign the contract and execute the bonds _____ days after being awarded the
bid - SOLUTION-5 days
What should be posted "in plain view" of workers at teh jobsite to ensure safety? - SOLUTION-
Emergency telephone numbers
For a negative air pressure unit or cabinet, what volt-power supply is needed? - SOLUTION-115
volt
Assembly Bill 2040 requires warning signs to state - SOLUTION-Danger- asbestos cancer and
lung hazard- keep out!
ACM stands for - SOLUTION-Asbestos Containing Material
The operating agency for each public school building in which fraible asbestos containing
materials have been identified shall monitor airborne asbestos levels in each sampling area. For
at least how many hours during a period of normal activity must this monitoring be done? -
SOLUTION-it must be done for 8 hours
What portion of insurance coverage for medical exams and monitoring as required by law must
the contractor provide? - SOLUTION-all of the cost
Mesothelioma is a cancer of - SOLUTION-the lining of the lungs
These are all true - SOLUTION-During removal, asbestos must be wetted to keep down airborne
fibers and there must be no visible emission to the outside air.
