POSITIONS AV QUESTIONS AND VERIFIED DETAILED
SOLUTIONS ( MULTIPLE CHOICES) |100% CORRECT!!
What alerts the crew that there is something wrong with the aircraft?
Correct Answers a warning
The AOA is the angle form between? Correct Answers wing chord
centerline and relative wind
Which AOA operates by holding the switch open so the horn does not
sound nor the warning light does not illuminate? Correct Answers Small
Lightly spring tab
A true AOA indicating system, the sensing element and transmitter is
usually located where? Correct Answers forward side of the fuselage
T or F. The sensing unit typically contains a heating element to ensure a
ice free transportation Correct Answers True
Which type AOA is free to rotate in the wind? Correct Answers Alpha
Vane
To incorporate a warning impending stall, many AOA systems
incorporate what? Correct Answers stick shaker
What are used to communicate to the pilot position status of individual
landing gear and a time? Correct Answers Gear indicators
, When a squat switch is compressed the switch is ______ Correct
Answers open
All ground locks should have what? Correct Answers red streamers
Ground locks are typically carried in the aircraft and put to place by the
flight crew during the what? Correct Answers Flight walk around
Landing gear position indicators are located where? Correct Answers
adjacent to the landing gear selector handle
Ground locks are commonly used on aircraft landing gear as a extra
insurance to make sure landing gear will remain up and locked when on
the ground Correct Answers False
Small aircraft sometime incorporate what to center the nose wheel?
Correct Answers External roller or guide pin on the strut
What does BITE stand for? Correct Answers Build In Test Equipment
Purpose of the bite is to allow testing of the system components and
provide warning should a particular component or part of the system
become inoperative. T or F Correct Answers True
SOLUTIONS ( MULTIPLE CHOICES) |100% CORRECT!!
What alerts the crew that there is something wrong with the aircraft?
Correct Answers a warning
The AOA is the angle form between? Correct Answers wing chord
centerline and relative wind
Which AOA operates by holding the switch open so the horn does not
sound nor the warning light does not illuminate? Correct Answers Small
Lightly spring tab
A true AOA indicating system, the sensing element and transmitter is
usually located where? Correct Answers forward side of the fuselage
T or F. The sensing unit typically contains a heating element to ensure a
ice free transportation Correct Answers True
Which type AOA is free to rotate in the wind? Correct Answers Alpha
Vane
To incorporate a warning impending stall, many AOA systems
incorporate what? Correct Answers stick shaker
What are used to communicate to the pilot position status of individual
landing gear and a time? Correct Answers Gear indicators
, When a squat switch is compressed the switch is ______ Correct
Answers open
All ground locks should have what? Correct Answers red streamers
Ground locks are typically carried in the aircraft and put to place by the
flight crew during the what? Correct Answers Flight walk around
Landing gear position indicators are located where? Correct Answers
adjacent to the landing gear selector handle
Ground locks are commonly used on aircraft landing gear as a extra
insurance to make sure landing gear will remain up and locked when on
the ground Correct Answers False
Small aircraft sometime incorporate what to center the nose wheel?
Correct Answers External roller or guide pin on the strut
What does BITE stand for? Correct Answers Build In Test Equipment
Purpose of the bite is to allow testing of the system components and
provide warning should a particular component or part of the system
become inoperative. T or F Correct Answers True
