IICRC WRT Test Questions and
Answers Verified Solutions
Latest Update (2026/2027)
Question:
#1. During the inspection process, restorers shall make a reasonable effort
to
Answer:
C. identify and address potential safety hazards
Question:
#2. A significant amount of water absorption and evaporation load where
wet porous materials
represent ~5% to ~40% of combined ceiling, walls, and flooring surface
areas and where low
evaporation materials and assemblies are minimally wet is
Answer:
B. class 2
Question:
#3. Multiple extraction of salvageable materials, especially porous material
(e. g. Carpet,
cushion) often are required to:
,Answer:
decrease drying time
Question:
#4. To enhance drying, restorers should manage both ambient temperature
and
Answer:
Question:
surface temperatures of affected materials
#5. Water damage restoration services should not begin until after the:
Answer:
restorer has entered into an adequately written contract.
Question:
#6. Two tools that should be used to properly disengage most stretched-in
carpet
Answer:
Question:
Knee kicker and carpet awl
#7. When inspecting a water damage structure, restorers should inspect:
Answer:
,all
potentially affected areas.
Question:
#8. Buckled or damaged particle board should
Answer:
removed and replaced with
new material.
Question:
#9. upon entering a building, professional moisture detection equipment
should be used to
evaluate and document:
Answer:
applicable psychrometric conditions and moisture
content or level readings.
Question:
#10. When wet, a structural material that loses most of its structural
integrity, but regains its
strength when dry, is:
Answer:
Concrete
, Question:
#11 Initially, a method of search for abnormal moisture behind ceramic tile
or resilient flooring
can be accomplished by
Answer:
using a non-penetrating (non-invasive) moisture
meter
Question:
#12. To minimize damage and reduce drying time, reduce drying time,
restorers should: -
Answer:
Question:
begin mitigation as soon as safely possible
#13. The moisture content of structural materials should be measured with a
Answer:
A. moisture meter
Question:
#14. When accessible from below, to dry wet wood subflooring under stone
or tile flooring,
restorers can use low-humidity air and
Answer:
Answers Verified Solutions
Latest Update (2026/2027)
Question:
#1. During the inspection process, restorers shall make a reasonable effort
to
Answer:
C. identify and address potential safety hazards
Question:
#2. A significant amount of water absorption and evaporation load where
wet porous materials
represent ~5% to ~40% of combined ceiling, walls, and flooring surface
areas and where low
evaporation materials and assemblies are minimally wet is
Answer:
B. class 2
Question:
#3. Multiple extraction of salvageable materials, especially porous material
(e. g. Carpet,
cushion) often are required to:
,Answer:
decrease drying time
Question:
#4. To enhance drying, restorers should manage both ambient temperature
and
Answer:
Question:
surface temperatures of affected materials
#5. Water damage restoration services should not begin until after the:
Answer:
restorer has entered into an adequately written contract.
Question:
#6. Two tools that should be used to properly disengage most stretched-in
carpet
Answer:
Question:
Knee kicker and carpet awl
#7. When inspecting a water damage structure, restorers should inspect:
Answer:
,all
potentially affected areas.
Question:
#8. Buckled or damaged particle board should
Answer:
removed and replaced with
new material.
Question:
#9. upon entering a building, professional moisture detection equipment
should be used to
evaluate and document:
Answer:
applicable psychrometric conditions and moisture
content or level readings.
Question:
#10. When wet, a structural material that loses most of its structural
integrity, but regains its
strength when dry, is:
Answer:
Concrete
, Question:
#11 Initially, a method of search for abnormal moisture behind ceramic tile
or resilient flooring
can be accomplished by
Answer:
using a non-penetrating (non-invasive) moisture
meter
Question:
#12. To minimize damage and reduce drying time, reduce drying time,
restorers should: -
Answer:
Question:
begin mitigation as soon as safely possible
#13. The moisture content of structural materials should be measured with a
Answer:
A. moisture meter
Question:
#14. When accessible from below, to dry wet wood subflooring under stone
or tile flooring,
restorers can use low-humidity air and
Answer:
