CSLB C10 TEST 1 120 2026 PRACTICE TEST
PACK COMPLETE SOLUTIONS VERIFIED
INSIGHTS
◉ Concrete proportioning is done based on the facilities available at
the site. Which are the general proportioning methods used for
concrete?
Answer: ALL OF THESE
-Surface area method
-Mix design based on flexural strength
-Maximum destiny method
◉ The minimum cementitious material that is required for concrete
bridging deck is ______________lbs/cu yd.
Answer: 675
◉ The amount of free water used in concrete shall not exceed
____________ pounds per cubic yard of concrete.
Answer: 310
Explanation:
,If the SCM are added, it can be increased to 20 pounds per each
required 100 pounds of cementitious material in excess of 550
pounds per cubic yard.
◉ If the concrete curbs are to be constructed over the existing
pavement, _______________ are used to fix them to pavement.
Answer: Steel dowels
◉ Which of the following is NOT an example of blended cement?
Answer: Combination of silica fume and chlorine fluoride
Explanation:
Blended cement is a combination of either Type || or Type V cement
with any of the SCM
◉ Which of the following is a line at which the face of the curb meets
the top of the payment?
Answer: Control Joint
◉ Which of the following is NOT used as concrete chemicals?
Answer: Abrasion bonding compound
Explanation:
, Concrete curing compound and polymer bonding agent are both
concrete chemicals.
◉ The admixtures that are used in concrete to improve durability in
freeze/thaw environments are ________________.
Answer: Air entrainment admixtures
◉ The fly ash which is used as SCM has the specific gravity
___________________.
Answer: 1.9 - 2.8
◉ The leveling operation that removes lumps and hollows and
provides a true and uniform concrete surface is called
______________________.
Answer: Screeding
◉ If the quantity of concrete is less than _____________ cubic yards, the
compliance test reports are not required.
Answer: 50
◉ Which type of Portland cement is used when early strength is
expected?
Answer: Type |||
PACK COMPLETE SOLUTIONS VERIFIED
INSIGHTS
◉ Concrete proportioning is done based on the facilities available at
the site. Which are the general proportioning methods used for
concrete?
Answer: ALL OF THESE
-Surface area method
-Mix design based on flexural strength
-Maximum destiny method
◉ The minimum cementitious material that is required for concrete
bridging deck is ______________lbs/cu yd.
Answer: 675
◉ The amount of free water used in concrete shall not exceed
____________ pounds per cubic yard of concrete.
Answer: 310
Explanation:
,If the SCM are added, it can be increased to 20 pounds per each
required 100 pounds of cementitious material in excess of 550
pounds per cubic yard.
◉ If the concrete curbs are to be constructed over the existing
pavement, _______________ are used to fix them to pavement.
Answer: Steel dowels
◉ Which of the following is NOT an example of blended cement?
Answer: Combination of silica fume and chlorine fluoride
Explanation:
Blended cement is a combination of either Type || or Type V cement
with any of the SCM
◉ Which of the following is a line at which the face of the curb meets
the top of the payment?
Answer: Control Joint
◉ Which of the following is NOT used as concrete chemicals?
Answer: Abrasion bonding compound
Explanation:
, Concrete curing compound and polymer bonding agent are both
concrete chemicals.
◉ The admixtures that are used in concrete to improve durability in
freeze/thaw environments are ________________.
Answer: Air entrainment admixtures
◉ The fly ash which is used as SCM has the specific gravity
___________________.
Answer: 1.9 - 2.8
◉ The leveling operation that removes lumps and hollows and
provides a true and uniform concrete surface is called
______________________.
Answer: Screeding
◉ If the quantity of concrete is less than _____________ cubic yards, the
compliance test reports are not required.
Answer: 50
◉ Which type of Portland cement is used when early strength is
expected?
Answer: Type |||
